Re: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 23/07/2024 00:33, Sunyeal Hong wrote:
> Add dt-schema for ExynosAuto v920 SoC clock controller.
> Add device tree clock binding definitions for below CMU blocks.
> 
> - CMU_TOP
> - CMU_PERIC0
> 
> Signed-off-by: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
> ---
>  .../clock/samsung,exynosautov920-clock.yaml   | 115 +++++++++++
>  .../clock/samsung,exynosautov920.h            | 191 ++++++++++++++++++
>  2 files changed, 306 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
>  create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
> new file mode 100644
> index 000000000000..90f9f17da959
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung ExynosAuto v920 SoC clock controller
> +
> +maintainers:
> +  - Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
> +  - Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> +  - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +  - Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> +
> +description: |
> +  ExynosAuto v920 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. Root clocks in that clock tree are
> +  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
> +  The external OSCCLK must be defined as fixed-rate clock in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other clocks of function blocks (other CMUs) are usually
> +  derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'include/dt-bindings/clock/samsung,exynosautov920.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,exynosautov920-cmu-top
> +      - samsung,exynosautov920-cmu-peric0
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynosautov920-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (38.4 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynosautov920-cmu-peric0
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (38.4 MHz)
> +            - description: CMU_PERIC0 NOC clock (from CMU_TOP)
> +            - description: CMU_PERIC0 IP clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: noc
> +            - const: ip
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_PERIC0
> +  - |
> +    #include <dt-bindings/clock/samsung,exynosautov920.h>
> +
> +    cmu_peric0: clock-controller@10800000 {
> +        compatible = "samsung,exynosautov920-cmu-peric0";
> +        reg = <0x10800000 0x8000>;
> +        #clock-cells = <1>;
> +
> +        clocks = <&xtcxo>,
> +                 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
> +                 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
> +        clock-names = "oscclk",
> +                      "noc",
> +                      "ip";
> +    };
> +
> +...
> diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h b/include/dt-bindings/clock/samsung,exynosautov920.h
> new file mode 100644
> index 000000000000..ad89728a4396
> --- /dev/null
> +++ b/include/dt-bindings/clock/samsung,exynosautov920.h
> @@ -0,0 +1,191 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (c) 2024 Samsung Electronics Co., Ltd.
> + * Author: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
> + *
> + * Device Tree binding constants for ExynosAuto v920 clock controller.
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
> +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
> +
> +/* CMU_TOP */
> +#define FOUT_SHARED0_PLL		1
> +#define FOUT_SHARED1_PLL		2
> +#define FOUT_SHARED2_PLL		3
> +#define FOUT_SHARED3_PLL		4
> +#define FOUT_SHARED4_PLL		5
> +#define FOUT_SHARED5_PLL		6
> +#define FOUT_MMC_PLL			7
> +
> +/* MUX in CMU_TOP */
> +#define MOUT_SHARED0_PLL		101

This is some odd numbering. Numbers start from 0 or 1 and are continuous.


Best regards,
Krzysztof