On Fri, 21 Jun 2024, Peter Griffin wrote:
> Hi Lee, Arnd, Krzysztof, all,
>
> This series adds support to syscon driver for a new of_syscon_register_regmap()
> api.
>
> Platforms such as gs101 require a special regmap to access PMU registers, which
> in the existing upstream client drivers are accessed via syscon regmap. This
> issue was partly solved in [1] whereby a custom regmap is created in exynos-pmu
> and a new API exynos_get_pmu_regmap_by_phandle() created.
>
> One issue with the approach in [1] is that it required client drivers to be
> updated from syscon_regmap_lookup_by_phandle() to
> exynos_get_pmu_regmap_by_phandle() when obtaining the regmap.
>
> Whilst updating to exynos_get_pmu_regmap_by_phandle() was OK for exynos
> specific drivers, it meant other drivers like syscon-reboot and syscon-poweroff
> which span multiple SoC architectures could not be easily re-used.
>
> In previous review feedback for USB phy and gs101 poweroff driver Krzysztof
> requested [2] that we take a more generic approach that other SoCs can also
> leverage.
>
> The new of_syscon_register_regmap() api overcomes this limitation by allowing
> a SoC driver like exynos-pmu to register it's SoC specific regmap with the
> syscon driver. This keeps the SoC complexity out of syscon driver, and allows
> client drivers to continue using syscon_regmap_lookup_by_phandle() as before.
> The solution allows more code re-use and can be used by other SoC archs.
>
> Notes on probe ordering
>
> exynos-pmu runs at postcore_initcall, so all but one of the client drivers
> (ufs phy, usb phy, watchdog) run after the regmap is created and registered.
>
> The one exception to this is pinctrl-samsung driver which is also
> postcore_initcall level. The exynos_get_pmu_regmap() and
> exynos_get_pmu_regmap_by_phandle() have been temporarily left to support
> -EPROBE_DEFER for pinctrl-samsung driver.
>
> The longer term plan to solve that probe ordering issue is to enable
> fw_devlink for syscon dt properties so they are correctly listed as
> suppliers in /sys/class/devlink. I tested a PoC patch (see below) for
> fw_devlink and that seemed to work fine. Once fw_devlink supports syscon I
> believe exynos_get_pmu_regmap_by_phandle() api could be removed. The main issue
> currently with fw_devlink syscon support is the wide diversity of dt property
> naming currently in use. That was discussed previously here [3]
>
> 1248a1256,1257
> > DEFINE_SUFFIX_PROP(syscon_phandle, "syscon-phandle", NULL)
> > DEFINE_SUFFIX_PROP(pmu_syscon, "pmu-syscon", NULL)
> 1358a1368,1369
> > { .parse_prop = parse_syscon_phandle, },
> > { .parse_prop = parse_pmu_syscon, },
>
>
> Note one previous concern from Saravana about syscon potentially probing
> before exynos-pmu driver and it relying on drivers/Makefile ordering. I tested
> this and even if mfd is listed before soc in drivers/Makefile exynos-pmu
> always probes first due to syscon driver not setting a .of_match_table entry.
>
> Once the syscon and exynos-pmu patchs are queued I will send patches for
> watchdog and ufs phy drivers to switch back to syscon_regmap_lookup_by_phandle()
>
> Many thanks,
>
> Peter.
>
> [1] https://lore.kernel.org/linux-arm-kernel/20240219204238.356942-1-peter.griffin@xxxxxxxxxx/T/
> [2] https://lore.kernel.org/lkml/06383015-51b2-4f4c-9fd8-e4f7ce12f44e@xxxxxxxxxx/
> [3] https://lore.kernel.org/all/CAGETcx-CCpaV7R0O0HpDpoX6KxQBuJiMmKdWA8nDE-5Qj2Sa7g@xxxxxxxxxxxxxx/
>
> Changes since v2:
> - Move allocation outside spinlock area (Arnd)
> Link to v2:
> - https://lore.kernel.org/linux-arm-kernel/20240620112446.1286223-1-peter.griffin@xxxxxxxxxx/
>
> Changes since v1:
> - Collect by tags
> - Keep syscon lock held for check and adding entry (Krzysztof)
> - pass pmu_np not np to syscon_node_to_regmap() (William)
>
> Link to v1:
> - https://lore.kernel.org/linux-arm-kernel/20240614140421.3172674-1-peter.griffin@xxxxxxxxxx/
>
> Peter Griffin (2):
> mfd: syscon: add of_syscon_register_regmap() API
> soc: samsung: exynos-pmu: update to use of_syscon_register_regmap()
>
> drivers/mfd/syscon.c | 48 ++++++++++++++++++++++++++++++++
> drivers/soc/samsung/exynos-pmu.c | 38 ++++++++++---------------
> include/linux/mfd/syscon.h | 8 ++++++
> 3 files changed, 70 insertions(+), 24 deletions(-)
Applied and submitted for build testing.
If all is good, I'll send out a PR for the other maintainer(s).
Note to self: ib-mfd-soc-samsung-6.11
--
Lee Jones [李琼斯]
