Timeouts on the AUX bus are to be expected in certain normal operating conditions. There is no need to raise an error log or re-initialize the whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and let upper layers know about the timeout. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Reviewed-by: Robert Foss <rfoss@xxxxxxxxxx> Tested-by: Heiko Stuebner <heiko@xxxxxxxxx> (rk3288-veyron and rk3399-gru) --- drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 3 +++ drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index 0f016dca9f3d..3afc73c858c4 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -1016,6 +1016,9 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp, writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA); + if (aux_status == AUX_STATUS_TIMEOUT_ERROR) + return -ETIMEDOUT; + dev_warn(dp->dev, "AUX CH error happened: %#x (%d)\n", aux_status, !!(reg & AUX_ERR)); goto aux_error; diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h index e284ee8da58b..12735139046c 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h @@ -361,6 +361,15 @@ /* ANALOGIX_DP_AUX_CH_STA */ #define AUX_BUSY (0x1 << 4) #define AUX_STATUS_MASK (0xf << 0) +#define AUX_STATUS_OK (0x0 << 0) +#define AUX_STATUS_NACK_ERROR (0x1 << 0) +#define AUX_STATUS_TIMEOUT_ERROR (0x2 << 0) +#define AUX_STATUS_UNKNOWN_ERROR (0x3 << 0) +#define AUX_STATUS_MUCH_DEFER_ERROR (0x4 << 0) +#define AUX_STATUS_TX_SHORT_ERROR (0x5 << 0) +#define AUX_STATUS_RX_SHORT_ERROR (0x6 << 0) +#define AUX_STATUS_NACK_WITHOUT_M_ERROR (0x7 << 0) +#define AUX_STATUS_I2C_NACK_ERROR (0x8 << 0) /* ANALOGIX_DP_AUX_CH_DEFER_CTL */ #define DEFER_CTRL_EN (0x1 << 7) -- 2.39.2
