Am Freitag, 3. Mai 2024, 17:11:15 CEST schrieb Lucas Stach: > Currently the AUX channel support in the Analogix DP driver is severely > limited as the AUX block of the bridge is only initialized when the video > link is to be enabled. This is okay for the purposes of link training, > but does not allow to detect displays by probing for EDID. This series > reworks the driver to allow AUX transactions before the video link is > active. > > As this requires to rework some of the controller initialization and > also handling of both internal and external clocks, the series includes > quite a few changes to add better runtime PM handling. > > Lucas Stach (14): > drm/bridge: analogix_dp: remove unused platform power_on_end callback > drm/rockchip: analogix_dp: add runtime PM handling > drm/bridge: analogix_dp: register AUX bus after enabling runtime PM > drm/bridge: analogix_dp: handle clock via runtime PM > drm/bridge: analogix_dp: remove unused analogix_dp_remove > drm/bridge: analogix_dp: remove clk handling from > analogix_dp_set_bridge > drm/bridge: analogix_dp: move platform and PHY power handling into > runtime PM > drm/bridge: analogix_dp: move basic controller init into runtime PM > drm/bridge: analogix_dp: remove PLL lock check from > analogix_dp_config_video > drm/bridge: analogix_dp: move macro reset after link bandwidth setting > drm/bridge: analogix_dp: don't wait for PLL lock too early > drm/bridge: analogix_dp: simplify and correct PLL lock checks > drm/bridge: analogix_dp: only read AUX status when an error occured > drm/bridge: analogix_dp: handle AUX transfer timeouts my knowledge of Analgix-dp internals is limited, but at least both rk3288-veyron and rk3399 gru still had working displays with this series applied and both device classes using the analogix-dp for their main display. So on rk3288-veyron and rk3399-gru Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
