On 20.05.2024 16:35, Mark Brown wrote:
On Sun, May 19, 2024 at 10:17:49AM +0200, Artur Weber wrote:+static int midas_headset_mic_bias(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct midas_priv *priv = snd_soc_card_get_drvdata(card); + + if (!priv->reg_headset_mic_bias) + return 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + return regulator_enable(priv->reg_headset_mic_bias); + case SND_SOC_DAPM_POST_PMD: + return regulator_disable(priv->reg_headset_mic_bias); + }We have SND_SOC_DAPM_REGULATOR_SUPPLY?
This is pretty much copied from the implementation of the mic bias and sub mic bias regulator handling in the same driver; they all use SND_SOC_DAPM_MIC combined with an enable/disable function like this one. What would be the correct thing to do here - add a secondary DAPM widget of type REGULATOR_SUPPLY and connect it to the MIC widget via audio- routing, or replace the entire MIC widget with a REGULATOR_SUPPLY (or something else entirely)? And should this be done with the Main Mic and Sub Mic as well? Best regards Artur
