Re: [PATCH v1 1/4] usb: ehci-exynos: Use devm_clk_get_enabled() helpers

[Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>]

Le 01/03/2024 à 20:38, Anand Moon a écrit :
> The devm_clk_get_enabled() helpers:
>      - call devm_clk_get()
>      - call clk_prepare_enable() and register what is needed in order to
>       call clk_disable_unprepare() when needed, as a managed resource.
>
> This simplifies the code and avoids the calls to clk_disable_unprepare().
>
> While at it, use dev_err_probe consistently, and use its return value
> to return the error code.
>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
>   drivers/usb/host/ehci-exynos.c | 30 +++++-------------------------
>   1 file changed, 5 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
> index f644b131cc0b..05aa3d9c2a3b 100644
> --- a/drivers/usb/host/ehci-exynos.c
> +++ b/drivers/usb/host/ehci-exynos.c
> @@ -159,19 +159,12 @@ static int exynos_ehci_probe(struct platform_device *pdev)
>   
>   	err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci);
>   	if (err)
> -		goto fail_clk;
> -
> -	exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
> -
> -	if (IS_ERR(exynos_ehci->clk)) {
> -		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
> -		err = PTR_ERR(exynos_ehci->clk);
> -		goto fail_clk;
> -	}
> +		goto fail_io;
>   
> -	err = clk_prepare_enable(exynos_ehci->clk);
> -	if (err)
> -		goto fail_clk;
> +	exynos_ehci->clk = devm_clk_get_enabled(&pdev->dev, "usbhost");
> +	if (IS_ERR(exynos_ehci->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(exynos_ehci->clk),
> +				  "Failed to get usbhost clock\n");
>   
>   	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
>   	if (IS_ERR(hcd->regs)) {
> @@ -223,8 +216,6 @@ static int exynos_ehci_probe(struct platform_device *pdev)
>   	exynos_ehci_phy_disable(&pdev->dev);
>   	pdev->dev.of_node = exynos_ehci->of_node;
>   fail_io:
> -	clk_disable_unprepare(exynos_ehci->clk);
> -fail_clk:
>   	usb_put_hcd(hcd);
>   	return err;
>   }
> @@ -240,8 +231,6 @@ static void exynos_ehci_remove(struct platform_device *pdev)
>   
>   	exynos_ehci_phy_disable(&pdev->dev);
>   
> -	clk_disable_unprepare(exynos_ehci->clk);
> -
>   	usb_put_hcd(hcd);
>   }
>   
> @@ -249,7 +238,6 @@ static void exynos_ehci_remove(struct platform_device *pdev)
>   static int exynos_ehci_suspend(struct device *dev)
>   {
>   	struct usb_hcd *hcd = dev_get_drvdata(dev);
> -	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
>   
>   	bool do_wakeup = device_may_wakeup(dev);
>   	int rc;
> @@ -260,25 +248,17 @@ static int exynos_ehci_suspend(struct device *dev)
>   
>   	exynos_ehci_phy_disable(dev);
>   
> -	clk_disable_unprepare(exynos_ehci->clk);

Hi,

I don't think that removing clk_[en|dis]abble from the suspend and 
resume function is correct.

The goal is to stop some hardware when the system is suspended, in order 
to save some power.

Why did you removed it?

CJ

> -
>   	return rc;
>   }
>   
>   static int exynos_ehci_resume(struct device *dev)
>   {
>   	struct usb_hcd *hcd = dev_get_drvdata(dev);
> -	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
>   	int ret;
>   
> -	ret = clk_prepare_enable(exynos_ehci->clk);
> -	if (ret)
> -		return ret;
> -
>   	ret = exynos_ehci_phy_enable(dev);
>   	if (ret) {
>   		dev_err(dev, "Failed to enable USB phy\n");
> -		clk_disable_unprepare(exynos_ehci->clk);
>   		return ret;
>   	}
>