Exynos850 has the same version of USI SPI (v2.1) as GS101.
Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.
Backward compatibility with DT is not broken because when alises are
set:
- the SPI core will set the bus number according to the alias ID
- the FIFO depth is always the same size for exynos850 (64 bytes) no
matter the alias ID number.
Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. Exynos850 integrates 3 SPI
IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
masks is misleading and can hide problems of the driver logic.
Just compiled tested.
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
drivers/spi/spi-s3c64xx.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 784786407d2e..9fcbe040cb2f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1576,10 +1576,9 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = {
};
static const struct s3c64xx_spi_port_config exynos850_spi_port_config = {
- /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */
- .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f },
- /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */
- .rx_lvl_offset = 15,
+ .fifo_depth = 64,
+ .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2,
+ .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2,
.tx_st_done = 25,
.clk_div = 4,
.high_speed = true,
--
2.43.0.687.g38aa6559b0-goog
