On Mon, Jan 29, 2024 at 11:42 AM André Draszik <andre.draszik@xxxxxxxxxx> wrote:
>
> This bus has three USB-related devices attached to it:
> 0x25: Maxim 77759 Type-C port controller
> 0x35: Maxim 20339EWB Surge protection IC
> 0x36: Maxim 77759 Fuel gauge
> 0x57: NXP PCA9468 Battery charger
> 0x66: Maxim 77759 PMIC
> 0x69: Maxim 77759 Charger
> where the Maxim 77759 has multiple i2c slave addresses.
>
> These don't have (upstream) Linux drivers yet, but nevertheless we can
> enable the bus so as to allow working on them (and to make i2cdetect /
> i2cdump / etc. work).
>
> Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
> Reviewed-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
>
> ---
Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> v2:
> * add short summary of devices attached to this bus & add TODO
> * collect Reviewed-by: tags
> ---
> arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> index cb4d17339b6b..6ccade2c8cb4 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> @@ -72,6 +72,11 @@ eeprom: eeprom@50 {
> };
> };
>
> +&hsi2c_12 {
> + status = "okay";
> + /* TODO: add the devices once drivers exist */
> +};
> +
> &pinctrl_far_alive {
> key_voldown: key-voldown-pins {
> samsung,pins = "gpa7-3";
> @@ -113,6 +118,11 @@ &usi8 {
> status = "okay";
> };
>
> +&usi12 {
> + samsung,mode = <USI_V2_I2C>;
> + status = "okay";
> +};
> +
> &watchdog_cl0 {
> timeout-sec = <30>;
> status = "okay";
> --
> 2.43.0.429.g432eaa2c6b-goog
>
