Re: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/12/2023 08:45, Jaewon Kim wrote:
> New ExynosAuto series GPIO have a different register structure.
> In the existing Exynos series, EINT control register enumerated after
> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
> However, from ExynosAutov920 SoC, the register that controls EINT belongs
> to each GPIO bank, and each GPIO bank has 0x1000 align.
> 
> This is a structure to protect the GPIO bank using S2MPU in VM environment,
> and will only be applied in ExynosAuto series SoCs.
> 
> -------------------------------------------------
> | original		| ExynosAutov920	|
> |-----------------------------------------------|
> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
> | 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
> | 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
> | 0x700	EINT_CON	| 0x18	EINT_CON	|
> | 0x800	EINT_FLTCON	| 0x1c	EINT_FLTCON0	|
> | 0x900	EINT_MASK	| 0x20	EINT_FLTCON1	|
> | 0xa00	EINT_PEND	| 0x24	EINT_MASK	|
> |			| 0x28	EINT_PEND	|
> -------------------------------------------------
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos.c  | 81 +++++++++++++++++++++--
>  drivers/pinctrl/samsung/pinctrl-exynos.h  |  1 +
>  drivers/pinctrl/samsung/pinctrl-samsung.c |  3 +
>  drivers/pinctrl/samsung/pinctrl-samsung.h | 12 ++++
>  4 files changed, 90 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index 6b58ec84e34b..f798f64b1122 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
>  	unsigned int mask;
>  	unsigned long flags;
>  
> +	if (bank->eint_mask_offset)
> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;

Drop the initialization of reg_mask so:

else:
reg_mask = ...


> +
>  	raw_spin_lock_irqsave(&bank->slock, flags);
>  
>  	mask = readl(bank->eint_base + reg_mask);
> @@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
>  	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
>  	unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
>  
> +	if (bank->eint_pend_offset)
> +		reg_pend = bank->pctl_offset + bank->eint_pend_offset;
> +
>  	writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
>  }
>  
> @@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
>  	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
>  		exynos_irq_ack(irqd);
>  

Ditto

> +	if (bank->eint_mask_offset)
> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
> +
>  	raw_spin_lock_irqsave(&bank->slock, flags);
>  
>  	mask = readl(bank->eint_base + reg_mask);
> @@ -139,6 +148,9 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
>  	else
>  		irq_set_handler_locked(irqd, handle_level_irq);
>  


Ditto

> +	if (bank->eint_con_offset)
> +		reg_con = bank->pctl_offset + bank->eint_con_offset;
> +
>  	con = readl(bank->eint_base + reg_con);
>  	con &= ~(EXYNOS_EINT_CON_MASK << shift);
>  	con |= trig_type << shift;
> @@ -221,6 +233,18 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
>  	/* eint_wake_mask_value not used */
>  };
>  
> +static const struct exynos_irq_chip exynosauto_gpio_irq_chip __initconst = {

No related to this patch.

> +	.chip = {
> +		.name = "exynosauto_gpio_irq_chip",
> +		.irq_unmask = exynos_irq_unmask,
> +		.irq_mask = exynos_irq_mask,
> +		.irq_ack = exynos_irq_ack,
> +		.irq_set_type = exynos_irq_set_type,
> +		.irq_request_resources = exynos_irq_request_resources,
> +		.irq_release_resources = exynos_irq_release_resources,
> +	},
> +};
> +
>  static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
>  					irq_hw_number_t hw)
>  {
> @@ -247,7 +271,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
>  	unsigned int svc, group, pin;
>  	int ret;
>  
> -	svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
> +	if (bank->eint_con_offset)
> +		svc = readl(bank->eint_base + EXYNOSAUTO_SVC_OFFSET);

This belongs to the second patch. The point of this patch is only to
customize the offsets. There should be nothing autov920 here.


> +	else
> +		svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
>  	group = EXYNOS_SVC_GROUP(svc);
>  	pin = svc & EXYNOS_SVC_NUM_MASK;
>  
> @@ -297,8 +324,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
>  		if (bank->eint_type != EINT_TYPE_GPIO)
>  			continue;
>  
> -		bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
> -					   sizeof(*bank->irq_chip), GFP_KERNEL);
> +		if (bank->eint_con_offset)
> +			bank->irq_chip = devm_kmemdup(dev, &exynosauto_gpio_irq_chip,
> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
> +		else
> +			bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
>  		if (!bank->irq_chip) {
>  			ret = -ENOMEM;
>  			goto err_domains;
> @@ -655,6 +686,19 @@ static void exynos_pinctrl_suspend_bank(
>  	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
>  }
>  
> +static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
> +					    struct samsung_pin_bank *bank)
> +{
> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
> +	void __iomem *regs = bank->eint_base;
> +
> +	save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
> +	save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
> +
> +	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
> +	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
> +}
> +
>  void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
> @@ -662,8 +706,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  	int i;
>  
>  	for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
> -		if (bank->eint_type == EINT_TYPE_GPIO)
> -			exynos_pinctrl_suspend_bank(drvdata, bank);
> +		if (bank->eint_type == EINT_TYPE_GPIO) {
> +			if (bank->eint_con_offset)
> +				exynosauto_pinctrl_suspend_bank(drvdata, bank);
> +			else
> +				exynos_pinctrl_suspend_bank(drvdata, bank);
> +		}
>  		else if (bank->eint_type == EINT_TYPE_WKUP) {
>  			if (!irq_chip) {
>  				irq_chip = bank->irq_chip;
> @@ -704,14 +752,33 @@ static void exynos_pinctrl_resume_bank(
>  						+ bank->eint_offset);
>  }
>  
> +static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
> +					   struct samsung_pin_bank *bank)
> +{
> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
> +	void __iomem *regs = bank->eint_base;
> +
> +	pr_debug("%s:     con %#010x => %#010x\n", bank->name,
> +		 readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
> +	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
> +		 readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
> +
> +	writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
> +	writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
> +}
> +
>  void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
>  	int i;
>  
>  	for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
> -		if (bank->eint_type == EINT_TYPE_GPIO)
> -			exynos_pinctrl_resume_bank(drvdata, bank);
> +		if (bank->eint_type == EINT_TYPE_GPIO) {
> +			if (bank->eint_con_offset)
> +				exynosauto_pinctrl_resume_bank(drvdata, bank);
> +			else
> +				exynos_pinctrl_resume_bank(drvdata, bank);
> +		}
>  }
>  
>  static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index 3ac52c2cf998..5049c170e958 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -31,6 +31,7 @@
>  #define EXYNOS7_WKUP_EMASK_OFFSET	0x900
>  #define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
>  #define EXYNOS_SVC_OFFSET		0xB08
> +#define EXYNOSAUTO_SVC_OFFSET		0xF008

As well not related to this patch.

Best regards,
Krzysztof





[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux