On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@xxxxxxxxxx> wrote:
>
> Add support for the pin-controller found on the gs101 SoC used in
> Pixel 6 phones.
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> .../pinctrl/samsung/pinctrl-exynos-arm64.c | 159 ++++++++++++++++++
> drivers/pinctrl/samsung/pinctrl-exynos.c | 2 +
> drivers/pinctrl/samsung/pinctrl-exynos.h | 34 ++++
> drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
> drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
> 5 files changed, 198 insertions(+)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> index cb965cf93705..e1a0668ecb16 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> @@ -796,3 +796,162 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
> .ctrl = fsd_pin_ctrl,
> .num_ctrl = ARRAY_SIZE(fsd_pin_ctrl),
> };
> +
> +/*
> + * bank type for non-alive type
> + * (CON bit field: 4, DAT bit field: 1, PUD bit field: 4, DRV bit field: 4)
> + * (CONPDN bit field: 2, PUDPDN bit field: 4)
> + */
> +static struct samsung_pin_bank_type gs101_bank_type_off = {
> + .fld_width = { 4, 1, 4, 4, 2, 4, },
> + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> +};
This is just the same as exynos850_bank_type_off (100% duplication).
Here is what I suggest. Now that it's obvious there is some common
platform for moder Exynos SoCs, and it's probably Exynos9, I'd suggest
next course of action (if maintainers agree):
1. Remove this one
2. Rename exynos850_bank_type_off to exynos9_bank_type_off
3. Use it for both gs101 and exynos850
Does it make sense?
> +
> +/*
> + * bank type for alive type
> + * (CON bit field: 4, DAT bit field: 1, PUD bit field: 4, DRV bit field: 4)
> + */
> +static const struct samsung_pin_bank_type gs101_bank_type_alive = {
> + .fld_width = { 4, 1, 4, 4, },
> + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> +};
Ditto, it's a duplication of exynos850_bank_type_alive .
> +
> +/* pin banks of gs101 pin-controller (ALIVE) */
> +static const struct samsung_pin_bank_data gs101_pin_alive[] = {
> + EXYNOS9_PIN_BANK_EINTW(8, 0x0, "gpa0", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTW(7, 0x20, "gpa1", 0x04, 0x08),
> + EXYNOS9_PIN_BANK_EINTW(5, 0x40, "gpa2", 0x08, 0x10),
> + EXYNOS9_PIN_BANK_EINTW(4, 0x60, "gpa3", 0x0c, 0x18),
> + EXYNOS9_PIN_BANK_EINTW(4, 0x80, "gpa4", 0x10, 0x1c),
> + EXYNOS9_PIN_BANK_EINTW(7, 0xa0, "gpa5", 0x14, 0x20),
> + EXYNOS9_PIN_BANK_EINTW(8, 0xc0, "gpa9", 0x18, 0x28),
> + EXYNOS9_PIN_BANK_EINTW(2, 0xe0, "gpa10", 0x1c, 0x30),
> +};
> +
> +/* pin banks of gs101 pin-controller (FAR_ALIVE) */
> +static const struct samsung_pin_bank_data gs101_pin_far_alive[] = {
> + EXYNOS9_PIN_BANK_EINTW(8, 0x0, "gpa6", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTW(4, 0x20, "gpa7", 0x04, 0x08),
> + EXYNOS9_PIN_BANK_EINTW(8, 0x40, "gpa8", 0x08, 0x0c),
> + EXYNOS9_PIN_BANK_EINTW(2, 0x60, "gpa11", 0x0c, 0x14),
> +};
> +
> +/* pin banks of gs101 pin-controller (GSACORE) */
> +static const struct samsung_pin_bank_data gs101_pin_gsacore[] = {
> + EXYNOS9_PIN_BANK_EINTG(2, 0x0, "gps0", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTG(8, 0x20, "gps1", 0x04, 0x04),
> + EXYNOS9_PIN_BANK_EINTG(3, 0x40, "gps2", 0x08, 0x0c),
> +};
> +
> +/* pin banks of gs101 pin-controller (GSACTRL) */
> +static const struct samsung_pin_bank_data gs101_pin_gsactrl[] = {
> + EXYNOS9_PIN_BANK_EINTW(6, 0x0, "gps3", 0x00, 0x00),
> +};
> +
> +/* pin banks of gs101 pin-controller (PERIC0) */
> +static const struct samsung_pin_bank_data gs101_pin_peric0[] = {
> + EXYNOS9_PIN_BANK_EINTG(5, 0x0, "gpp0", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x20, "gpp1", 0x04, 0x08),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x40, "gpp2", 0x08, 0x0c),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x60, "gpp3", 0x0c, 0x10),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x80, "gpp4", 0x10, 0x14),
> + EXYNOS9_PIN_BANK_EINTG(2, 0xa0, "gpp5", 0x14, 0x18),
> + EXYNOS9_PIN_BANK_EINTG(4, 0xc0, "gpp6", 0x18, 0x1c),
> + EXYNOS9_PIN_BANK_EINTG(2, 0xe0, "gpp7", 0x1c, 0x20),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x100, "gpp8", 0x20, 0x24),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x120, "gpp9", 0x24, 0x28),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x140, "gpp10", 0x28, 0x2c),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x160, "gpp11", 0x2c, 0x30),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x180, "gpp12", 0x30, 0x34),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x1a0, "gpp13", 0x34, 0x38),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x1c0, "gpp14", 0x38, 0x3c),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x1e0, "gpp15", 0x3c, 0x40),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x200, "gpp16", 0x40, 0x44),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x220, "gpp17", 0x44, 0x48),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x240, "gpp18", 0x48, 0x4c),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x260, "gpp19", 0x4c, 0x50),
> +};
> +
> +/* pin banks of gs101 pin-controller (PERIC1) */
> +static const struct samsung_pin_bank_data gs101_pin_peric1[] = {
> + EXYNOS9_PIN_BANK_EINTG(8, 0x0, "gpp20", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x20, "gpp21", 0x04, 0x08),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x40, "gpp22", 0x08, 0x0c),
> + EXYNOS9_PIN_BANK_EINTG(8, 0x60, "gpp23", 0x0c, 0x10),
> + EXYNOS9_PIN_BANK_EINTG(4, 0x80, "gpp24", 0x10, 0x18),
> + EXYNOS9_PIN_BANK_EINTG(4, 0xa0, "gpp25", 0x14, 0x1c),
> + EXYNOS9_PIN_BANK_EINTG(5, 0xc0, "gpp26", 0x18, 0x20),
> + EXYNOS9_PIN_BANK_EINTG(4, 0xe0, "gpp27", 0x1c, 0x28),
> +};
> +
> +/* pin banks of gs101 pin-controller (HSI1) */
> +static const struct samsung_pin_bank_data gs101_pin_hsi1[] = {
> + EXYNOS9_PIN_BANK_EINTG(6, 0x0, "gph0", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTG(7, 0x20, "gph1", 0x04, 0x08),
> +};
> +
> +/* pin banks of gs101 pin-controller (HSI2) */
> +static const struct samsung_pin_bank_data gs101_pin_hsi2[] = {
> + EXYNOS9_PIN_BANK_EINTG(6, 0x0, "gph2", 0x00, 0x00),
> + EXYNOS9_PIN_BANK_EINTG(2, 0x20, "gph3", 0x04, 0x08),
> + EXYNOS9_PIN_BANK_EINTG(6, 0x40, "gph4", 0x08, 0x0c),
> +};
> +
> +static const struct samsung_pin_ctrl gs101_pin_ctrl[] __initconst = {
> + {
> + /* pin banks of gs101 pin-controller (ALIVE) */
> + .pin_banks = gs101_pin_alive,
> + .nr_banks = ARRAY_SIZE(gs101_pin_alive),
> + .eint_wkup_init = exynos_eint_wkup_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + }, {
> + /* pin banks of gs101 pin-controller (FAR_ALIVE) */
> + .pin_banks = gs101_pin_far_alive,
> + .nr_banks = ARRAY_SIZE(gs101_pin_far_alive),
> + .eint_wkup_init = exynos_eint_wkup_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + }, {
> + /* pin banks of gs101 pin-controller (GSACORE) */
> + .pin_banks = gs101_pin_gsacore,
> + .nr_banks = ARRAY_SIZE(gs101_pin_gsacore),
> + }, {
> + /* pin banks of gs101 pin-controller (GSACTRL) */
> + .pin_banks = gs101_pin_gsactrl,
> + .nr_banks = ARRAY_SIZE(gs101_pin_gsactrl),
> + }, {
> + /* pin banks of gs101 pin-controller (PERIC0) */
> + .pin_banks = gs101_pin_peric0,
> + .nr_banks = ARRAY_SIZE(gs101_pin_peric0),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + }, {
> + /* pin banks of gs101 pin-controller (PERIC1) */
> + .pin_banks = gs101_pin_peric1,
> + .nr_banks = ARRAY_SIZE(gs101_pin_peric1),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + }, {
> + /* pin banks of gs101 pin-controller (HSI1) */
> + .pin_banks = gs101_pin_hsi1,
> + .nr_banks = ARRAY_SIZE(gs101_pin_hsi1),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + }, {
> + /* pin banks of gs101 pin-controller (HSI2) */
> + .pin_banks = gs101_pin_hsi2,
> + .nr_banks = ARRAY_SIZE(gs101_pin_hsi2),
> + .eint_gpio_init = exynos_eint_gpio_init,
> + .suspend = exynos_pinctrl_suspend,
> + .resume = exynos_pinctrl_resume,
> + },
> +};
> +
> +const struct samsung_pinctrl_of_match_data gs101_of_data __initconst = {
> + .ctrl = gs101_pin_ctrl,
> + .num_ctrl = ARRAY_SIZE(gs101_pin_ctrl),
> +};
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index 56fc11a1fe2f..75b9cf72ce73 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -537,6 +537,8 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
> .data = &exynos7_wkup_irq_chip },
> { .compatible = "samsung,exynosautov9-wakeup-eint",
> .data = &exynos7_wkup_irq_chip },
> + { .compatible = "google,gs101-wakeup-eint",
> + .data = &exynos7_wkup_irq_chip },
> { }
> };
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index e2799ff1b5e9..1ffc90db079d 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -147,6 +147,40 @@
> .name = id \
> }
>
> +#define EXYNOS9_PIN_BANK_EINTN(types, pins, reg, id) \
> + { \
> + .type = &types, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_NONE, \
> + .fltcon_type = FLT_DEFAULT \
> + .name = id \
> + }
Where exactly it is used? What is 'types'? Moreover, it doesn't look
very different from EXYNOS850_PIN_BANK_EINTN() -- just because I
created EXYNOS850_PIN_BANK_EINTN() exactly from this downstream macro.
I was strictly prohibited adding EXYNOS9_* stuff back at the time. But
now I guess it should be apparent we are actually dealing with Exynos9
common platform. So I suggest renaming EXYNOS850_PIN_BANK_EINTN() to
EXYNOS9_PIN_BANK_EINTN().
> +
> +#define EXYNOS9_PIN_BANK_EINTG(pins, reg, id, offs, fltcon_offs) \
> + { \
> + .type = &gs101_bank_type_off, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_GPIO, \
> + .eint_offset = offs, \
> + .fltcon_type = FLT_DEFAULT, \
> + .fltcon_offset = fltcon_offs, \
> + .name = id \
> + }
Ditto. Please add filter fields to EXYNOS850_PIN_BANK_EINTG() instead
of adding pretty much the same macro (it is the same, I created
EXYNOS850_PIN_BANK_EINTG() from exactly this macro). Also I suggest
renaming EXYNOS850_PIN_BANK_EINTG() to EXYNOS9_PIN_BANK_EINTG(), to
avoid confusion. If you need any help with reworking Exynos850 pinctrl
correspondingly, please let me know.
> +
> +#define EXYNOS9_PIN_BANK_EINTW(pins, reg, id, offs, fltcon_offs) \
> + { \
> + .type = &gs101_bank_type_alive, \
> + .pctl_offset = reg, \
> + .nr_pins = pins, \
> + .eint_type = EINT_TYPE_WKUP, \
> + .eint_offset = offs, \
> + .fltcon_type = FLT_SELECTABLE, \
> + .fltcon_offset = fltcon_offs, \
> + .name = id \
> + }
Ditto.
> +
> /**
> * struct exynos_weint_data: irq specific data for all the wakeup interrupts
> * generated by the external wakeup interrupt controller.
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index 50c360b4753a..982a5702714c 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1323,6 +1323,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
> .data = &exynosautov9_of_data },
> { .compatible = "tesla,fsd-pinctrl",
> .data = &fsd_of_data },
> + { .compatible = "google,gs101-pinctrl",
> + .data = &gs101_of_data },
> #endif
> #ifdef CONFIG_PINCTRL_S3C64XX
> { .compatible = "samsung,s3c64xx-pinctrl",
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
> index 5fab3885a7d7..f6856290608c 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.h
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
> @@ -373,6 +373,7 @@ extern const struct samsung_pinctrl_of_match_data exynos7885_of_data;
> extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
> extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
> extern const struct samsung_pinctrl_of_match_data fsd_of_data;
> +extern const struct samsung_pinctrl_of_match_data gs101_of_data;
> extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
> extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
> extern const struct samsung_pinctrl_of_match_data s3c2416_of_data;
> --
> 2.43.0.rc2.451.g8631bc7472-goog
>
