To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.
Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
drivers/i2c/busses/i2c-s3c2410.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 127eb3805fac..f9dcb1112a61 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -216,8 +216,13 @@ static bool is_ack(struct s3c24xx_i2c *i2c)
int tries;
for (tries = 50; tries; --tries) {
- if (readl(i2c->regs + S3C2410_IICCON)
- & S3C2410_IICCON_IRQPEND) {
+ unsigned long tmp = readl(i2c->regs + S3C2410_IICCON);
+
+ if (!(tmp & S3C2410_IICCON_ACKEN)) {
+ usleep_range(100, 200);
+ return true;
+ }
+ if (tmp & S3C2410_IICCON_IRQPEND) {
if (!(readl(i2c->regs + S3C2410_IICSTAT)
& S3C2410_IICSTAT_LASTBIT))
return true;
--
2.34.1
