Use event codes with linux-event-codes.h included for input keys on midas.
Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/samsung/exynos4412-midas.dtsi | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 3c1ae3c19828..d00b500254ab 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos-pinctrl.h"
@@ -137,21 +138,21 @@ gpio-keys {
key-down {
gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
- linux,code = <114>;
+ linux,code = <KEY_VOLUMEDOWN>;
label = "volume down";
debounce-interval = <10>;
};
key-up {
gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
- linux,code = <115>;
+ linux,code = <KEY_VOLUMEUP>;
label = "volume up";
debounce-interval = <10>;
};
key-power {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
+ linux,code = <KEY_POWER>;
label = "power";
debounce-interval = <10>;
wakeup-source;
@@ -159,7 +160,7 @@ key-power {
key-ok {
gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x160>;
+ linux,code = <KEY_OK>;
label = "ok";
debounce-interval = <10>;
wakeup-source;
--
2.39.2
