Hello,
the only change here compared to (implicit) v1 sent with Message-Id:
20231010075112.755178-1-u.kleine-koenig@xxxxxxxxxxxxxx is a rebase on
Thierry's current for-next branch and I added the tags I recieved on the
previous submission.
In v1 I did a small improvement for the brcmstb PWM driver en passant,
which was already done by Florian in a patch that is now commit
aacbd6543669 ("pwm: brcmstb: Checked clk_prepare_enable() return
value"). So the brcmstb patch in this series simplified to be similar to
the other patches here and so the commit log improvement that I promised
on Jonathan Cameron's feedback was dropped again.
Best regards
Uwe
Uwe Kleine-König (11):
pwm: atmel-hlcdc: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: atmel-tcb: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: berlin: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: brcmstb: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: dwc: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: imx-tpm: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: samsung: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: stm32-lp: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: stm32: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: tiecap: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
pwm: tiehrpwm: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
drivers/pwm/pwm-atmel-hlcdc.c | 8 +++-----
drivers/pwm/pwm-atmel-tcb.c | 8 +++-----
drivers/pwm/pwm-berlin.c | 8 +++-----
drivers/pwm/pwm-brcmstb.c | 8 +++-----
drivers/pwm/pwm-dwc.c | 6 ++----
drivers/pwm/pwm-imx-tpm.c | 10 +++++-----
drivers/pwm/pwm-samsung.c | 6 ++----
drivers/pwm/pwm-stm32-lp.c | 10 +++++-----
drivers/pwm/pwm-stm32.c | 8 ++++----
drivers/pwm/pwm-tiecap.c | 6 ++----
drivers/pwm/pwm-tiehrpwm.c | 8 +++-----
11 files changed, 35 insertions(+), 51 deletions(-)
base-commit: 4bb36d126cb3147d6bbfd00242a5b846dacad595
--
2.42.0
