Re: [PATCH v5 13/17] firmware: qcom_scm: provide a read-modify-write function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9/10/2023 1:46 AM, Mukesh Ojha wrote:
It was realized by Srinivas K. that there is a need of
read-modify-write scm exported function so that it can
be used by multiple clients.

Let's introduce qcom_scm_io_update_field() which masks
out the bits and write the passed value to that
bit-offset. Subsequent patch will use this function.

Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---


Validated this change on IPQ9574 and IPQ53332 and system is entering into the download mode.

Tested-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx> # IP9574 and IPQ5332


  drivers/firmware/qcom_scm.c            | 20 ++++++++++++++++++++
  include/linux/firmware/qcom/qcom_scm.h |  2 ++
  2 files changed, 22 insertions(+)

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index fde33acd46b7..5ea8fc4fd4e8 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -78,6 +78,7 @@ static const char * const qcom_scm_convention_names[] = {
  };
static struct qcom_scm *__scm;
+static DEFINE_SPINLOCK(lock);
static int qcom_scm_clk_enable(void)
  {
@@ -407,6 +408,25 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
  }
  EXPORT_SYMBOL(qcom_scm_set_remote_state);
+int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
+{
+	unsigned int old, new;
+	int ret;
+
+	spin_lock(&lock);
+	ret = qcom_scm_io_readl(addr, &old);
+	if (ret)
+		goto unlock;
+
+	new = (old & ~mask) | (val & mask);
+
+	ret = qcom_scm_io_writel(addr, new);
+unlock:
+	spin_unlock(&lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_scm_io_update_field);
+
  static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
  {
  	struct qcom_scm_desc desc = {
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index 250ea4efb7cb..ca41e4eb33ad 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -84,6 +84,8 @@ extern bool qcom_scm_pas_supported(u32 peripheral);
extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
  extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
+				    unsigned int val);
extern bool qcom_scm_restore_sec_cfg_available(void);
  extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux