On 7/31/23 10:36, Svyatoslav Ryhel wrote: > Extend properties supported by max17040 fuel gauge if it is accompanied > by different devices. > > If max17040 is coupled with a charger, pass charger status since it should > match and max17040 has no dedicated status detection ability. > > max17040_get_online can be reused for PRESENT property since if it is > online it must be present. > > Finally, max17040 may be coupled with a dedicated thermal sensor which > monitors battery temperature so lets add support for iio channel to match > hw setup. With that said, the driver got dependency on CONFIG_IIO which > was added to Kconfig. All defconfigs apart s5pv210_defconfig have IIO > already enabled so only s5pv210_defconfig needed adjustment. [whole series] Reviewed-by: Iskren Chernev <me@xxxxxxxxxxx> > --- > Changes from v2: > - documentation: fixed typo i2c0 > i2c > - added dependency on CONFIG_IIO > - enabled CONFIG_IIO for s5pv210_defconfig to avoid regressions (all other > defconfigs which include max17040 already have IIO enabled) > > Changes from v1: > - documentation: dropped monitored-battery and power-supplies (inherited > from inclusion) > - dropped passing charger health as battery health > - dropped patch for simple battery cell support > - switched iio_read_channel_raw to iio_read_channel_processed_scale > - switched iio_channel_get to devm_iio_channel_get > - re-organized implementation of temp channel (implemented in way > *_get_optional functions usually act) > --- > > Svyatoslav Ryhel (4): > dt-bindings: power: supply: maxim,max17040: update properties > power: max17040: pass status property from supplier > power: max17040: get thermal data from adc if available > ARM: configs: s5pv210_defconfig: enable IIO required by MAX17040 > > .../bindings/power/supply/maxim,max17040.yaml | 31 +++++++++++++++++++ > arch/arm/configs/s5pv210_defconfig | 1 + > drivers/power/supply/Kconfig | 2 +- > drivers/power/supply/max17040_battery.c | 27 ++++++++++++++++ > 4 files changed, 60 insertions(+), 1 deletion(-) >
