Add the four physical buttons support, volume buttons have
external pull-up resistors.
Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx>
---
arch/arm/boot/dts/exynos5422-samsung-k3g.dts | 60 ++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
index 1a11a6993ba7..c3e006dc34ea 100644
--- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
@@ -21,6 +22,45 @@ / {
aliases {
mmc0 = &mmc_0;
+ mmc1 = &mmc_1;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_gpio &volume_up_gpio &volume_down_gpio &home_gpio>;
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-home {
+ label = "Home";
+ gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ key-power {
+ label = "Power";
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
};
memory@20000000 {
@@ -641,6 +681,21 @@ &mmc_1 {
};
&pinctrl_0 {
+ volume_up_gpio: volume-up-pins {
+ samsung,pins = "gpx0-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; /* External pull up */
+ };
+
+ volume_down_gpio: volume-down-pins {
+ samsung,pins = "gpx0-3";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; /* External pull up */
+ };
+
+ home_gpio: home-key-pins {
+ samsung,pins = "gpx0-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ };
+
s2mps11_irq: s2mps11-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
@@ -653,6 +708,11 @@ touch_irq: touch-irq-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
+ power_gpio: power-key-pins {
+ samsung,pins = "gpx2-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ };
+
wlan_reset: wlan-reset {
samsung,pins = "gpy7-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
--
2.41.0
