Re: [PATCH v2 3/4] spi: Split transfers larger than max size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/22/23 16:16, Mark Brown wrote:
On Thu, Jun 22, 2023 at 02:48:36PM -0500, Eddie James wrote:
On 9/27/22 06:21, Vincent Whitchurch wrote:
A couple of drivers call spi_split_transfers_maxsize() from their
->prepare_message() callbacks to split transfers which are too big for
them to handle.  Add support in the core to do this based on
->max_transfer_size() to avoid code duplication.
I've been testing AT25 functionality in linux 6.1 and I believe this patch
is breaking the AT25 protocol. It will split a write command up such that
some of the data is in a different transfer than  the write enable and
address. According to my understanding of the AT25 spec, that doesn't
work... Someone correct me if I'm wrong though. Do we need a flag to
enable/disable this behavior depending on the client perhaps?
Could you be more specific about the manner in which you think this is
breaking things?  The size of transfer is immaterial to the client
device on SPI, the client will be counting clocks while the chip select
is asserted.  How the controller chooses to split things up is really
not particularly visible or relevant, it might bitbang things out one
bit at a time, transfer a single word at a time or batch things up
further.  So long as the chip select is asserted it's all the same to
the client device.


Ok, I understand better now. Agreed it shouldn't make a difference, but this is actually a limitation of the spi controller I'm using (spi-fsi). The controller cannot handle multiple transfers keeping the chip select enabled... I guess the driver can batch transfers in the message to get around this, unless you want to add a flag for that behavior.



In any case this is all based on the maximum transfer size advertised by
the conteroller driver, if the device can physically handle larger
transfers then there's no reason for it to set a limit.  If the driver
can't physically handle larger transfers and it does make a difference
then the system simply won't work.


Yep, this is also an artifact of the spi-fsi driver having different transfer size limits for writes and reads. Funnily enough the at25 driver doesn't truly respect the max transfer size (it doesn't include the write command and address bytes in the calculation against the max transfer size) so that's how this worked previously.

Thanks!

Eddie





[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux