Introduce support for the Galaxy Tab 3 8.0 series of boards: - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi) - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g) - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte) What works: - Display and backlight - Touchscreen - GPIO buttons, hall sensor - WiFi and Bluetooth - USB, fuel gauge, charging - Accelerometer and magnetometer - Audio: speaker, microphone, headset - WiFi model only: light sensor Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> --- This is an updated version of "[PATCH v3 13/13] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards"[1]. Changed in v4: - Added touchkey keycodes - Added audio nodes - Added MMC aliases - Fixed dtbs_check warnings - Fixed indentation in pinctrl sleep state overrides Changed in v3: - Addressed review comments - Removed rtc node (RTC is provided by PMIC) - Added CPU thermal node - Fixed dtbs_check warnings - Added common changes from next/dt Should pass dtbs_check with no errors, provided that the following patches are present: Backlight node is adapted to changes from "[PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize"[2]. The whole patchset has been reviewed, waiting for any further reviews or a merge. Touchkey keycode property is added by "[PATCH 1/2] dt-bindings: mms114: Add linux,keycodes property for touch keys"[3]. So far only the bindings part of the patch has been acked, otherwise everything is awaiting review. Display bindings have been added by "[PATCH v5 1/3] dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controller"[4]. These are already reviewed and merged into the DRM tree. [1] https://lore.kernel.org/linux-devicetree/20230501195525.6268-14-aweber.kernel@xxxxxxxxx/ [2] https://lore.kernel.org/linux-devicetree/20230519180728.2281-2-aweber.kernel@xxxxxxxxx/ [3] https://lore.kernel.org/linux-devicetree/20230521145843.19489-2-aweber.kernel@xxxxxxxxx/ [4] https://lore.kernel.org/linux-devicetree/20230519170354.29610-2-aweber.kernel@xxxxxxxxx/ --- arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/exynos4212-tab3-3g8.dts | 29 + arch/arm/boot/dts/exynos4212-tab3-lte8.dts | 44 + arch/arm/boot/dts/exynos4212-tab3-wifi8.dts | 26 + arch/arm/boot/dts/exynos4212-tab3.dtsi | 1303 +++++++++++++++++++ 5 files changed, 1405 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59829fc90315..6a4ca481171e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -217,6 +217,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4212-tab3-3g8.dtb \ + exynos4212-tab3-lte8.dtb \ + exynos4212-tab3-wifi8.dtb \ exynos4412-i9300.dtb \ exynos4412-i9305.dtb \ exynos4412-itop-elite.dtb \ diff --git a/arch/arm/boot/dts/exynos4212-tab3-3g8.dts b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts new file mode 100644 index 000000000000..d96b2dd44608 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree + * source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4212-tab3.dtsi" + +/ { + model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212"; + compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4"; + chassis-type = "tablet"; +}; + +/* Pin control sleep state overrides */ +&sleep0 { + PIN_SLP(gpb-5, INPUT, UP); +}; + +&sleep1 { + PIN_SLP(gpl0-0, OUT0, NONE); + PIN_SLP(gpl1-0, OUT0, NONE); + PIN_SLP(gpl2-4, OUT0, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); +}; diff --git a/arch/arm/boot/dts/exynos4212-tab3-lte8.dts b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts new file mode 100644 index 000000000000..bbb398eca7b0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree + * source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4212-tab3.dtsi" + +/ { + model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212"; + compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4"; + chassis-type = "tablet"; +}; + +/* Pin control sleep state overrides */ +&sleep0 { + PIN_SLP(gpa0-4, INPUT, UP); + PIN_SLP(gpa0-5, INPUT, UP); + + PIN_SLP(gpb-5, INPUT, UP); + + PIN_SLP(gpc0-0, PREV, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + + PIN_SLP(gpf1-6, INPUT, NONE); + PIN_SLP(gpf2-2, PREV, NONE); +}; + +&sleep1 { + PIN_SLP(gpl0-0, PREV, NONE); + + PIN_SLP(gpl1-0, PREV, NONE); + + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-4, OUT0, NONE); + PIN_SLP(gpl2-5, PREV, NONE); + + PIN_SLP(gpm3-3, OUT1, NONE); +}; diff --git a/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts new file mode 100644 index 000000000000..54cb01703b60 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree + * source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4212-tab3.dtsi" + +/ { + model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212"; + compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4"; + chassis-type = "tablet"; +}; + +&i2c_lightsensor { + status = "okay"; + + lightsensor@10 { + compatible = "capella,cm3323"; + reg = <0x10>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4212-tab3.dtsi b/arch/arm/boot/dts/exynos4212-tab3.dtsi new file mode 100644 index 000000000000..e014100e11f8 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212-tab3.dtsi @@ -0,0 +1,1303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4212 based Galaxy Tab 3 board common source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4212.dtsi" +#include "exynos4412-ppmu-common.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos-pinctrl.h" + +/* + * This device does not use the built-in RTC; instead, the RTC in the + * S5M8786 PMIC is used instead. Remove the unused node to avoid DTB check + * warnings. + */ +/delete-node/ &rtc; + +/ { + compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4"; + + memory@40000000 { + device_type = "memory"; + + /* + * Technically 1.5GB is available, but the latter 512MB is handled + * in a special way by downstream (every second page is skipped), + * and thus doesn't initialize correctly on mainline. Only 1020M is + * used for now. + */ + reg = <0x40000000 0x3fc00000>; + }; + + aliases { + mmc0 = &mshc_0; /* Internal storage */ + mmc1 = &sdhci_2; /* SD card */ + mmc2 = &sdhci_3; /* WiFi */ + }; + + chosen { + stdout-path = &serial_2; + + /* Default S-BOOT bootloader loads initramfs here */ + linux,initrd-start = <0x42000000>; + linux,initrd-end = <0x42800000>; + }; + + firmware@204f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + key-up { + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-down { + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-home { + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "home"; + debounce-interval = <10>; + }; + + switch-hall-sensor { + gpios = <&gpx2 4 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + label = "hall effect sensor"; + debounce-interval = <10>; + wakeup-source; + }; + }; + + led-touchkeys { + compatible = "regulator-led"; + vled-supply = <&ldo20_reg>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + }; + + i2c_max77693: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_irq>; + + regulators { + esafeout1_reg: ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + regulator-boot-on; + }; + + esafeout2_reg: ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + }; + }; + + i2c_max77693_fuel: i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17050"; + reg = <0x36>; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_fuel_irq>; + + maxim,over-heat-temp = <500>; + maxim,over-volt = <4500>; + }; + }; + + i2c_magnetometer: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas532"; + reg = <0x2e>; + iovdd-supply = <&ldo3_reg>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; + }; + + i2c_lightsensor: i2c-gpio-4 { + compatible = "i2c-gpio"; + sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* WiFi model uses CM3323, 3G/LTE use CM36653 */ + }; + + i2c_bl: i2c-gpio-5 { + compatible = "i2c-gpio"; + sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + backlight: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + bl-name = "lcd-bl"; + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x78>; /* 120 */ + + power-supply = <&vbatt_reg>; + enable-supply = <&backlight_reset_supply>; + + pwms = <&pwm 1 78770 0>; + pwm-names = "lp8556"; + + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x34>; + }; + + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xfa>; + }; + }; + }; + + vbatt_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VBATT"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + backlight_reset_supply: voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT_ENVDDIO"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_reset>; + gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + display_3v3_supply: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "DISPLAY_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */ + enable-active-high; + }; + + mic_bias_reg: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + submic_bias_reg: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "SUB_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + sound: sound { + compatible = "samsung,midas-audio"; + model = "TAB3"; + mic-bias-supply = <&mic_bias_reg>; + submic-bias-supply = <&submic_bias_reg>; + + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "IN2LP:VXRN", "MICBIAS1", + "IN2LN", "MICBIAS1", + "Main Mic", "MICBIAS1", + + "IN1RP", "MICBIAS2", + "IN1RN", "MICBIAS2", + "Sub Mic", "MICBIAS2", + + "IN1LP", "Headset Mic", + "IN1LN", "Headset Mic"; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&wm1811>; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>; + clocks = <&s5m8767_osc S2MPS11_CLK_BT>; + clock-names = "ext_clock"; + }; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_display { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>, <&cpu1 13 13>; + }; + }; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + panel@0 { + compatible = "samsung,lsl080al02", "samsung,s6d7aa0"; + reg = <0>; + power-supply = <&display_3v3_supply>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_nrst>; + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; +}; + +&exynos_usbphy { + vbus-supply = <&esafeout1_reg>; + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "otg"; + status = "okay"; +}; + +&i2c_1 { + pinctrl-0 = <&i2c1_bus>; + pinctrl-names = "default"; + status = "okay"; + + lis3dh: accelerometer@19 { + /* K2DH seems to be the same as lis2dh12 in terms of registers */ + compatible = "st,lis2dh12-accel"; + reg = <0x19>; + + interrupt-parent = <&gpx0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&ldo17_reg>; + vddio-supply = <&ldo3_reg>; + + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@48 { + /* MELFAS MMS252, using MMS114 compatible for now */ + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpb>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + avdd-supply = <&ldo21_reg>; + vdd-supply = <&ldo25_reg>; + linux,keycodes = <KEY_MENU KEY_BACK>; + }; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: audio-codec@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpx3>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + #sound-dai-cells = <0>; + + wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 + 0x0 0x8000 0x0 0x0 0x0>; + wlf,micbias-cfg = <0x25 0x2f>; + + wlf,lineout1-feedback; + wlf,lineout1-se; + wlf,lineout2-se; + wlf,ldoena-always-driven; + + AVDD2-supply = <&ldo3_reg>; + CPVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + DBVDD2-supply = <&ldo3_reg>; + DBVDD3-supply = <&ldo3_reg>; + SPKVDD1-supply = <&vbatt_reg>; + SPKVDD2-supply = <&vbatt_reg>; + wlf,ldo1ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767: pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <1>; + + s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>, + <&gpm3 1 GPIO_ACTIVE_HIGH>, + <&gpm3 2 GPIO_ACTIVE_HIGH>; + + s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>, + <&gpf3 2 GPIO_ACTIVE_HIGH>, + <&gpf3 3 GPIO_ACTIVE_HIGH>; + + s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VCC_3.3V_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <3>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <3>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VCC_1.8V_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <1>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "VLED_IC_1.9V"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + op_mode = <1>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VTOUCH_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo21_reg: LDO21 { + regulator-name = "TSP_VDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "5M_AF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; + }; + + ldo24_reg: LDO24 { + regulator-name = "LEDA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VTCAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_INT"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_G3D"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mshc_0 { + broken-cd; + non-removable; + card-detect-delay = <200>; + vmmc-supply = <&ldo22_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + status = "okay"; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + lcd_en: lcd-en-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + lcd_nrst: lcd-nrst-pins { + samsung,pins = "gpf0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + s5m8767_ds: s5m8767-ds-pins { + samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sleep0: sleep-state { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, DOWN); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, DOWN); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, DOWN); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, NONE); + PIN_SLP(gpc0-3, INPUT, NONE); + PIN_SLP(gpc0-4, INPUT, NONE); + + PIN_SLP(gpc1-0, INPUT, DOWN); + PIN_SLP(gpc1-1, INPUT, DOWN); + PIN_SLP(gpc1-2, INPUT, DOWN); + PIN_SLP(gpc1-3, INPUT, DOWN); + PIN_SLP(gpc1-4, INPUT, DOWN); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, OUT0, NONE); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, DOWN); + PIN_SLP(gpf0-1, INPUT, DOWN); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, OUT0, NONE); + PIN_SLP(gpf0-5, OUT0, NONE); + PIN_SLP(gpf0-6, INPUT, DOWN); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, DOWN); + PIN_SLP(gpf1-5, INPUT, DOWN); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, INPUT, DOWN); + + PIN_SLP(gpf2-0, INPUT, DOWN); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, DOWN); + PIN_SLP(gpf2-7, INPUT, DOWN); + + PIN_SLP(gpf3-0, INPUT, DOWN); + PIN_SLP(gpf3-1, INPUT, DOWN); + PIN_SLP(gpf3-2, INPUT, DOWN); + PIN_SLP(gpf3-3, INPUT, DOWN); + PIN_SLP(gpf3-4, PREV, NONE); + PIN_SLP(gpf3-5, OUT0, DOWN); + + PIN_SLP(gpj0-0, INPUT, DOWN); + PIN_SLP(gpj0-1, INPUT, DOWN); + PIN_SLP(gpj0-2, INPUT, DOWN); + PIN_SLP(gpj0-3, OUT0, NONE); + PIN_SLP(gpj0-4, INPUT, DOWN); + PIN_SLP(gpj0-5, INPUT, DOWN); + PIN_SLP(gpj0-6, OUT0, NONE); + PIN_SLP(gpj0-7, OUT0, NONE); + + PIN_SLP(gpj1-0, OUT0, NONE); + PIN_SLP(gpj1-1, INPUT, DOWN); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + bt_shutdown: bt-shutdown-pins { + samsung,pins = "gpl0-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_host_wakeup: bt-host-wakeup-pins { + samsung,pins = "gpx2-6"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bt_device_wakeup: bt-device-wakeup-pins { + samsung,pins = "gpx3-1"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + backlight_reset: backlight-reset-pins { + samsung,pins = "gpm0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + gpio_keys: gpio-keys-pins { + samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77693_irq: max77693-irq-pins { + samsung,pins = "gpx1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + max77693_fuel_irq: max77693-fuel-irq-pins { + samsung,pins = "gpx2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sdhci2_cd: sdhci2-cd-irq-pins { + samsung,pins = "gpx3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + s5m8767_dvs: s5m8767-dvs-pins { + samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + s5m8767_irq: s5m8767-irq-pins { + samsung,pins = "gpx0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sleep1: sleep-state { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, PREV, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, NONE); + PIN_SLP(gpl0-2, INPUT, NONE); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, INPUT, DOWN); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, OUT0, NONE); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, PREV, NONE); + PIN_SLP(gpl2-2, PREV, NONE); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, INPUT, DOWN); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, PREV, NONE); + PIN_SLP(gpm0-1, OUT0, NONE); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, OUT0, NONE); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, OUT0, NONE); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, INPUT, DOWN); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, PREV, NONE); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, OUT0, NONE); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, PREV, NONE); + PIN_SLP(gpm4-5, INPUT, NONE); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, NONE); + PIN_SLP(gpy0-3, INPUT, NONE); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-state { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-state { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + PIN_SLP(gpv4-1, INPUT, DOWN); + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&pwm { + pinctrl-0 = <&pwm1_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <1>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&ldo23_reg>; + status = "okay"; +}; + +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; /* BCM4334B0 */ + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + max-speed = <3000000>; + shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + clocks = <&s5m8767_osc S2MPS11_CLK_BT>; + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; base-commit: a3119e95a0d193a0c13168ba48bd081ce11060ff -- 2.41.0
