[PATCH 2/2] media: dt-bindings: samsung-fimc: drop simple-bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The FIMC camera node wrapper is not a bus, so using simple-bus fallback
compatible just to instantiate its children nodes was never correct.
Drop the simple-bus compatible and expect driver to explicitly populate
children devices.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/samsung-fimc.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 20447529c985..f90267f1180e 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -15,7 +15,7 @@ Common 'camera' node
 
 Required properties:
 
-- compatible: must be "samsung,fimc", "simple-bus"
+- compatible: must be "samsung,fimc"
 - clocks: list of clock specifiers, corresponding to entries in
   the clock-names property;
 - clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
@@ -156,8 +156,8 @@ Example:
 		};
 	};
 
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
+	camera@11800000 {
+		compatible = "samsung,fimc";
 		clocks = <&clock 132>, <&clock 133>, <&clock 351>,
 			 <&clock 352>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
@@ -166,6 +166,7 @@ Example:
 		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_port_a_clk_active>;
+		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-- 
2.34.1




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux