Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
> On 03/02/2023 12:51, Marek Szyprowski wrote:
>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>> as reported by dtc W=1:
>>>>>>
>>>>>>     exynos4412.dtsi:407.20-413.5:
>>>>>>       Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>
>>>>>> and dtbs_check:
>>>>>>
>>>>>>     exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>       {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>
>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>> in device nodes (if they are not shared).
>>>>>>
>>>>> Applied.
>>>> I don't have a good news. It looks that this change is responsible for
>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>
>>>> (before)
>>>>
>>>> # dmesg | grep exynos-bus
>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>> (100000 KHz ~ 267000 KHz)
>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>> (100000 KHz ~ 400000 KHz)
>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>> (100000 KHz ~ 134000 KHz)
>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>> 50000 KHz ~ 100000 KHz)
>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>> (100000 KHz ~ 200000 KHz)
>>>>
>>>> (after)
>>>>
>>>> # dmesg | grep exynos-bus
>>>>
>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>> KHz ~ 200000 KHz)
>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>> KHz ~ 100000 KHz)
>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>> (100000 KHz ~ 200000 KHz)
>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>> KHz ~ 267000 KHz)
>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>> KHz ~ 400000 KHz)
>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>> (160000 KHz ~ 200000 KHz)
>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>> KHz ~ 134000 KHz)
>>>>
>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>> regression that need to be addressed somehow...
>>>
>>> Thanks for checking, but what is exactly the bug? The devices registered
>>> - just with different name.
>>
>> The bug is that the board fails to boot from time to time, freezing 
>> after registering PPMU counters...
> 
> My U3 with and without this patch, reports several warnings:
> iommu_group_do_set_platform_dma()
> exynos_iommu_domain_free()
> clk_core_enable()
> 
> and finally:
> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> 
> and keeps stalling.
> 
> At least on next-20230203. Except all these (which anyway make board
> unbootable) look fine around PMU and exynos-bus.

I also booted few times my next/dt branch (with this patch) and no
problems. How reproducible is the issue you experience?

Best regards,
Krzysztof




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux