LCDIF-DSIM glue logic inverts the HS/VS/DE signals and expecting
the i.MX8M Mini/Nano DSI host to add additional Data Enable signal
active low (DE_LOW). This makes the valid data transfer on each
horizontal line.
So, add additional bus flags DE_LOW setting via input_bus_flags for
i.MX8M Mini/Nano platforms.
v8:
* add DE_LOW for i.MX8M Mini/Nano platforms.
v7, v6:
* none
v5:
* rebased based on updated bridge changes
v4, v3, v2, v1:
* none
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/samsung-dsim.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 33e5ae9c865f..65f7d8522bc1 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1627,6 +1627,10 @@ static const struct samsung_dsim_host_ops samsung_dsim_generic_host_ops = {
.unregister_host = samsung_dsim_unregister_host,
};
+static const struct drm_bridge_timings samsung_dsim_bridge_timings_de_low = {
+ .input_bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
int samsung_dsim_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1709,6 +1713,10 @@ int samsung_dsim_probe(struct platform_device *pdev)
dsi->bridge.of_node = dev->of_node;
dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+ /* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
+ if (dsi->plat_data->hw_type == SAMSUNG_DSIM_TYPE_IMX8MM)
+ dsi->bridge.timings = &samsung_dsim_bridge_timings_de_low;
+
if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host)
ret = dsi->plat_data->host_ops->register_host(dsi);
--
2.25.1
