From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> [ Upstream commit f2812227bb07e2eaee74253f11cea1576945df31 ] The exynos-pcie driver called phy_power_on() before phy_init() for some historical reasons. However the generic PHY framework assumes that the proper sequence is to call phy_init() first, then phy_power_on(). The operations done by both functions should be considered as one action and as such they are called by the exynos-pcie driver (without doing anything between them). The initialization is just a sequence of register writes, which cannot be altered without breaking the hardware operation. To match the generic PHY framework requirement, simply move all register writes to the phy_init()/phy_exit() and drop power_on()/power_off() callbacks. This way the driver will also work with the old (incorrect) PHY initialization call sequence. Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@xxxxxxxxxxx Reported-by: Bjorn Helgaas <helgaas@xxxxxxxxxx> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Reviewed-by: Chanho Park <chanho61.park@xxxxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Acked-By: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/phy/samsung/phy-exynos-pcie.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c index 578cfe07d07a..53c9230c2907 100644 --- a/drivers/phy/samsung/phy-exynos-pcie.c +++ b/drivers/phy/samsung/phy-exynos-pcie.c @@ -51,6 +51,13 @@ static int exynos5433_pcie_phy_init(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy); + regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_APP_REQ_EXIT_L1_MODE, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, PCIE_PHY_RESET, 1); regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, @@ -109,20 +116,7 @@ static int exynos5433_pcie_phy_init(struct phy *phy) return 0; } -static int exynos5433_pcie_phy_power_on(struct phy *phy) -{ - struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - - regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, - BIT(0), 1); - regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, - PCIE_APP_REQ_EXIT_L1_MODE, 0); - regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, - PCIE_REFCLK_GATING_EN, 0); - return 0; -} - -static int exynos5433_pcie_phy_power_off(struct phy *phy) +static int exynos5433_pcie_phy_exit(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy); @@ -135,8 +129,7 @@ static int exynos5433_pcie_phy_power_off(struct phy *phy) static const struct phy_ops exynos5433_phy_ops = { .init = exynos5433_pcie_phy_init, - .power_on = exynos5433_pcie_phy_power_on, - .power_off = exynos5433_pcie_phy_power_off, + .exit = exynos5433_pcie_phy_exit, .owner = THIS_MODULE, }; -- 2.35.1
