Re: [PATCH] dt-bindings: phy: samsung,ufs-phy: match clock items

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/07/2022 08:23, Chanho Park wrote:
>>> Below error is detected from dtbs_check. exynos7-ufs-phy is required
>>> symbol clocks otherwise only PLL ref clock is required.
>>>
>>> clock-names: ['ref_clk'] is too short
>>
>> Thank you for your patch. There is something to discuss/improve.
> 
> Thanks for your review :) 
> 
>>
>>>
>>> Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>>> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>>> Suggested-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
>>> Signed-off-by: Chanho Park <chanho61.park@xxxxxxxxxxx>
>>> ---
>>>  .../bindings/phy/samsung,ufs-phy.yaml         | 47 +++++++++++++++----
>>>  1 file changed, 37 insertions(+), 10 deletions(-)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
>>> b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
>>> index 8da99461e817..3b04f31d9f21 100644
>>> --- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
>>> +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
>>> @@ -27,18 +27,12 @@ properties:
>>>        - const: phy-pma
>>>
>>>    clocks:
>>> -    items:
>>> -      - description: PLL reference clock
>>> -      - description: symbol clock for input symbol ( rx0-ch0 symbol
>> clock)
>>> -      - description: symbol clock for input symbol ( rx1-ch1 symbol
>> clock)
>>> -      - description: symbol clock for output symbol ( tx0 symbol clock)
>>> +    minItems: 1
>>> +    maxItems: 4
>>>
>>>    clock-names:
>>> -    items:
>>> -      - const: ref_clk
>>> -      - const: rx1_symbol_clk
>>> -      - const: rx0_symbol_clk
>>> -      - const: tx0_symbol_clk
>>> +    minItems: 1
>>> +    maxItems: 4
>>>
>>>    samsung,pmu-syscon:
>>>      $ref: '/schemas/types.yaml#/definitions/phandle-array'
>>> @@ -53,6 +47,39 @@ properties:
>>>        It can be phandle/offset pair. The second cell which can represent
>> an
>>>        offset is optional.
>>>
>>> +allOf:
>>
>> The allOf block should go after "required" block.
> 
> I wrote the block after required block but I changed the order by referring
> https://elixir.bootlin.com/linux/v5.18-rc2/source/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml#L53
> I'll correct the order.

Yeah, I put not the recommended order. I need to find another example
for giving to people :)


Best regards,
Krzysztof



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux