From: Krzysztof Kozlowski <krzk@xxxxxxxxxx> [ Upstream commit 9e916fb9bc3d16066286f19fc9c51d26a6aec6bd ] dtschema expects DMA channels in specific order (tx, rx and tx-sec). The order actually should not matter because dma-names is used however let's make it aligned with dtschema to suppress warnings like: i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Co-developed-by: Jonathan Bakker <xc-racer2@xxxxxxx> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx> Link: https://lore.kernel.org/r/CY4PR04MB056779A9C50DC95987C5272ACB1C9@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +- arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index c8f1c324a6c2..b8390a9bf588 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -636,7 +636,7 @@ touchscreen@4a { }; &i2s0 { - dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; status = "okay"; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 353ba7b09a0c..c5265f3ae31d 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -239,8 +239,8 @@ i2s0: i2s@eee30000 { reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -259,8 +259,8 @@ i2s1: i2s@e2100000 { reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -274,8 +274,8 @@ i2s2: i2s@e2a00000 { reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; -- 2.35.1
