The DTS uses hardware register values directly in pin controller pin configuration. These are not some IDs or other abstraction layer but raw numbers used in the registers. These numbers were previously put in the bindings header to avoid code duplication and to provide some context meaning (name), but they do not fit the purpose of bindings. It is also quite confusing to use constants prefixed with Exynos for other SoC, because there is actually nothing here in common, except the actual value. Store the constants in a header next to DTS and use them instead of bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm/boot/dts/s3c2410-pinctrl.h | 19 +++++++++++++ arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +++++++++++++------------- 2 files changed, 38 insertions(+), 19 deletions(-) create mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h new file mode 100644 index 000000000000..71cb0ac815b3 --- /dev/null +++ b/arch/arm/boot/dts/s3c2410-pinctrl.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung's Exynos pinctrl bindings + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@xxxxxxxxxx> + */ + +#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ + +#define S3C2410_PIN_FUNC_INPUT 0 +#define S3C2410_PIN_FUNC_OUTPUT 1 +#define S3C2410_PIN_FUNC_2 2 +#define S3C2410_PIN_FUNC_3 3 + +#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi index 20a7d72827c2..3268366bd8bc 100644 --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Heiko Stuebner <heiko@xxxxxxxxx> */ -#include <dt-bindings/pinctrl/samsung.h> +#include "s3c2410-pinctrl.h" &pinctrl_0 { /* @@ -82,91 +82,91 @@ gpm: gpm-gpio-bank { uart0_data: uart0-data-pins { samsung,pins = "gph-0", "gph-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gph-8", "gph-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart1_data: uart1-data-pins { samsung,pins = "gph-2", "gph-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gph-10", "gph-11"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart2_data: uart2-data-pins { samsung,pins = "gph-4", "gph-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart2_fctl: uart2-fctl-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart3_data: uart3-data-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; extuart_clk: extuart-clk-pins { samsung,pins = "gph-12"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpe-14", "gpe-15"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpe-11", "gpe-12", "gpe-13"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpe-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpe-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_bus1: sd0-bus1-pins { samsung,pins = "gpe-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_bus4: sd0-bus4-pins { samsung,pins = "gpe-8", "gpe-9", "gpe-10"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gpl-8"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_clk: sd1-clk-pins { samsung,pins = "gpl-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_bus1: sd1-bus1-pins { samsung,pins = "gpl-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_bus4: sd1-bus4-pins { samsung,pins = "gpl-1", "gpl-2", "gpl-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; }; -- 2.34.1
