Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers

[Larry Finger <Larry.Finger@xxxxxxxxxxxx>]

On 3/26/22 14:51, Joe Perches wrote:
> On Sat, 2022-03-26 at 19:27 +0100, Mauro Carvalho Chehab wrote:
> > Em Sat, 26 Mar 2022 19:24:54 +0100
> > Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> escreveu:
> >
> > > Em Sat, 26 Mar 2022 17:59:03 +0100
> > > Benjamin Stürz <benni@xxxxxxxxxx> escreveu:
> > >
> > > > This replaces comments with C99's designated
> > > > initializers because the kernel supports them now.
> > > >
> > > > Signed-off-by: Benjamin Stürz <benni@xxxxxxxxxx>
> > > > ---
> > > >   drivers/media/usb/dvb-usb/dibusb-mb.c | 62 +++++++++++++--------------
> > > >   drivers/media/usb/dvb-usb/dibusb-mc.c | 34 +++++++--------
> > > >   2 files changed, 48 insertions(+), 48 deletions(-)
> > > >
> > > > diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
> > > > index e9dc27f73970..f188e07f518b 100644
> > > > --- a/drivers/media/usb/dvb-usb/dibusb-mb.c
> > > > +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
> > > > @@ -122,40 +122,40 @@ static int dibusb_probe(struct usb_interface *intf,
> > > >   
> > > >   /* do not change the order of the ID table */
> > > >   static struct usb_device_id dibusb_dib3000mb_table [] = {
> > > > -/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> > > > -/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
> > > > -/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> > > > -/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> > > > -/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> > > > -/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> > > > -/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> > > > -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> > > > -/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> > > > -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> > > > -/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> > > > -/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> > > > -/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> > > > -/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> > > > -/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> > > > -/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> > > > -/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> > > > -/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> > > > -/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> > > > -/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> > > > -/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> > > > -/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> > > > -/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> > > > -/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
> > > > +[0]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> > > > +[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
> > >
> > > While here, please properly indent this table, and respect the 80-columns limit,
> > > e. g.:
> > >
> > > static struct usb_device_id dibusb_dib3000mb_table [] = {
> > > 	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
> > > 			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
> > > 	},
> > > 	[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,
> > > 			     USB_PID_AVERMEDIA_DVBT_USB_WARM)
> > > 	},
> > > 	...
> >
> > Err.... something went wrong with my space bar and I ended hitting send to
> > soon... I meant:
> >
> > static struct usb_device_id dibusb_dib3000mb_table [] = {
> >   	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
> >   			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
> >   	},
> >   	[1] = { USB_DEVICE(USB_VID_WIDEVIEW,
> >   			   USB_PID_AVERMEDIA_DVBT_USB_WARM)
> >   	},
> > 	...
> > };
>
> maybe static const too
>
> and
>
> maybe
>
> #define DIB_DEVICE(vid, pid)	\
> 	{ USB_DEVICE(USB_VID_ ## vid, USB_PID_ ## pid) }
>
> so maybe
>
> static const struct usb_device_id dibusb_dib3000mb_table[] = {
> 	[0] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_COLD),
> 	[1] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_WARM),
> 	...
> };
>
> though I _really_ doubt the value of the specific indexing.
>
> I think this isn't really worth changing at all.

I agree. For the drivers that I maintain, I try to keep the vendor and device 
ids in numerical order. As this table does not require a special order, adding a 
new one in the middle would require redoing all of then after that point. That 
would be pointless work!

Larry