Re: [PATCH 6/7] tty: serial: samsung: constify variables and pointers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04. 03. 22, 9:03, Krzysztof Kozlowski wrote:
Constify variables, data pointed by several pointers and
"udivslot_table" static array.  This makes code a bit safer.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>

Reviewed-by: Jiri Slaby <jirislaby@xxxxxxxxxx>

---
  drivers/tty/serial/samsung_tty.c | 38 ++++++++++++++++----------------
  1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index eecefff5c4a4..00e7c34fad46 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -164,7 +164,7 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
  #define portaddrl(port, reg) \
  	((unsigned long *)(unsigned long)((port)->membase + (reg)))
-static u32 rd_reg(struct uart_port *port, u32 reg)
+static u32 rd_reg(const struct uart_port *port, u32 reg)
  {
  	switch (port->iotype) {
  	case UPIO_MEM:
@@ -179,7 +179,7 @@ static u32 rd_reg(struct uart_port *port, u32 reg)
#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) -static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+static void wr_reg(const struct uart_port *port, u32 reg, u32 val)
  {
  	switch (port->iotype) {
  	case UPIO_MEM:
@@ -195,7 +195,7 @@ static void wr_reg(struct uart_port *port, u32 reg, u32 val)
/* Byte-order aware bit setting/clearing functions. */ -static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
+static inline void s3c24xx_set_bit(const struct uart_port *port, int idx,
  				   unsigned int reg)
  {
  	unsigned long flags;
@@ -208,7 +208,7 @@ static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
  	local_irq_restore(flags);
  }
-static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
+static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx,
  				     unsigned int reg)
  {
  	unsigned long flags;
@@ -221,19 +221,19 @@ static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
  	local_irq_restore(flags);
  }
-static inline struct s3c24xx_uart_port *to_ourport(const struct uart_port *port)
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
  {
  	return container_of(port, struct s3c24xx_uart_port, port);
  }
/* translate a port to the device name */ -static inline const char *s3c24xx_serial_portname(struct uart_port *port)
+static inline const char *s3c24xx_serial_portname(const struct uart_port *port)
  {
  	return to_platform_device(port->dev)->name;
  }
-static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
+static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
  {
  	return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
  }
@@ -358,7 +358,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
  {
-	struct uart_port *port = &ourport->port;
+	const struct uart_port *port = &ourport->port;
  	u32 ucon;
/* Mask Tx interrupt */
@@ -387,7 +387,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
  {
-	struct uart_port *port = &ourport->port;
+	const struct uart_port *port = &ourport->port;
  	u32 ucon, ufcon;
/* Set ufcon txtrig */
@@ -580,9 +580,9 @@ static inline const struct s3c24xx_uart_info
  }
static inline const struct s3c2410_uartcfg
-	*s3c24xx_port_to_cfg(struct uart_port *port)
+	*s3c24xx_port_to_cfg(const struct uart_port *port)
  {
-	struct s3c24xx_uart_port *ourport;
+	const struct s3c24xx_uart_port *ourport;
if (port->dev == NULL)
  		return NULL;
@@ -591,7 +591,7 @@ static inline const struct s3c2410_uartcfg
  	return ourport->cfg;
  }
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport,
  				     unsigned long ufstat)
  {
  	const struct s3c24xx_uart_info *info = ourport->info;
@@ -947,8 +947,8 @@ static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
  /* interrupt handler for s3c64xx and later SoC's.*/
  static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
  {
-	struct s3c24xx_uart_port *ourport = id;
-	struct uart_port *port = &ourport->port;
+	const struct s3c24xx_uart_port *ourport = id;
+	const struct uart_port *port = &ourport->port;
  	unsigned int pend = rd_regl(port, S3C64XX_UINTP);
  	irqreturn_t ret = IRQ_HANDLED;
@@ -966,8 +966,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
  /* interrupt handler for Apple SoC's.*/
  static irqreturn_t apple_serial_handle_irq(int irq, void *id)
  {
-	struct s3c24xx_uart_port *ourport = id;
-	struct uart_port *port = &ourport->port;
+	const struct s3c24xx_uart_port *ourport = id;
+	const struct uart_port *port = &ourport->port;
  	unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
  	irqreturn_t ret = IRQ_NONE;
@@ -1499,7 +1499,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
   * This table takes the fractional value of the baud divisor and gives
   * the recommended setting for the UDIVSLOT register.
   */
-static u16 udivslot_table[16] = {
+static const u16 udivslot_table[16] = {
  	[0] = 0x0000,
  	[1] = 0x0080,
  	[2] = 0x0808,
@@ -1675,7 +1675,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
static const char *s3c24xx_serial_type(struct uart_port *port)
  {
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	const struct s3c24xx_uart_port *ourport = to_ourport(port);
switch (ourport->info->type) {
  	case TYPE_S3C24XX:
@@ -2450,7 +2450,7 @@ s3c24xx_port_configured(unsigned int ucon)
static int s3c24xx_serial_get_poll_char(struct uart_port *port)
  {
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	const struct s3c24xx_uart_port *ourport = to_ourport(port);
  	unsigned int ufstat;
ufstat = rd_regl(port, S3C2410_UFSTAT);


--
js
suse labs



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux