Convert the Mediatek Universal Flash Storage (UFS) Controller to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../devicetree/bindings/ufs/mediatek,ufs.yaml | 67 +++++++++++++++++++ .../devicetree/bindings/ufs/ufs-mediatek.txt | 45 ------------- 2 files changed, 67 insertions(+), 45 deletions(-) create mode 100644 Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml delete mode 100644 Documentation/devicetree/bindings/ufs/ufs-mediatek.txt diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml new file mode 100644 index 000000000000..32fd535a514a --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Universal Flash Storage (UFS) Controller + +maintainers: + - Stanley Chu <stanley.chu@xxxxxxxxxxxx> + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + enum: + - mediatek,mt8183-ufshci + - mediatek,mt8192-ufshci + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ufs + + phys: + maxItems: 1 + + reg: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - clocks + - clock-names + - phys + - reg + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@ff3c0000 { + compatible = "mediatek,mt8183-ufshci"; + reg = <0 0x11270000 0 0x2300>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; + phys = <&ufsphy>; + + clocks = <&infracfg_ao CLK_INFRA_UFS>; + clock-names = "ufs"; + freq-table-hz = <0 0>; + + vcc-supply = <&mt_pmic_vemc_ldo_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt deleted file mode 100644 index 63a953b672d2..000000000000 --- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Mediatek Universal Flash Storage (UFS) Host Controller - -UFS nodes are defined to describe on-chip UFS hardware macro. -Each UFS Host Controller should have its own node. - -To bind UFS PHY with UFS host controller, the controller node should -contain a phandle reference to UFS M-PHY node. - -Required properties for UFS nodes: -- compatible : Compatible list, contains the following controller: - "mediatek,mt8183-ufshci" for MediaTek UFS host controller - present on MT8183 chipsets. - "mediatek,mt8192-ufshci" for MediaTek UFS host controller - present on MT8192 chipsets. -- reg : Address and length of the UFS register set. -- phys : phandle to m-phy. -- clocks : List of phandle and clock specifier pairs. -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. "ufs" is mandatory. - "ufs": ufshci core control clock. -- freq-table-hz : Array of <min max> operating frequencies stored in the same - order as the clocks property. If this property is not - defined or a value in the array is "0" then it is assumed - that the frequency is set by the parent clock or a - fixed rate clock source. -- vcc-supply : phandle to VCC supply regulator node. - -Example: - - ufsphy: phy@11fa0000 { - ... - }; - - ufshci@11270000 { - compatible = "mediatek,mt8183-ufshci"; - reg = <0 0x11270000 0 0x2300>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; - phys = <&ufsphy>; - - clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>; - clock-names = "ufs"; - freq-table-hz = <0 0>; - - vcc-supply = <&mt_pmic_vemc_ldo_reg>; - }; -- 2.32.0
