Add bindings for common parts (platform) of Universal Flash Storage
(UFS) Host Controllers in dtschema format.
The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix
defines uint32 type, not an array. Therefore deprecate 'freq-table-hz'
and use 'freq-table' instead.
Include also the bindings directory in UFS maintainers entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 2 +-
.../devicetree/bindings/ufs/ufs-common.yaml | 86 +++++++++++++++++++
.../devicetree/bindings/ufs/ufs-hisi.txt | 4 +-
MAINTAINERS | 1 +
4 files changed, 90 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
index 4d13e6bc1c50..dc93fe2d3458 100644
--- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -80,7 +80,7 @@ examples:
compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
reg = <0x0 0x4000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- freq-table-hz = <19200000 19200000>;
+ freq-table = <19200000 19200000>;
power-domains = <&k3_pds 277>;
clocks = <&k3_clks 277 1>;
assigned-clocks = <&k3_clks 277 1>;
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 000000000000..66d0612b9991
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
+ - Avri Altman <avri.altman@xxxxxxx>
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ freq-table-hz:
+ deprecated: true
+ description:
+ Use freq-table.
+
+ freq-table:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 64
+ description: |
+ Array of <min max> operating frequencies in Hz stored in the same order
+ as the clocks property. If this property is not defined or a value in the
+ array is "0" then it is assumed that the frequency is set by the parent
+ clock or a fixed rate clock source.
+
+ interrupts:
+ maxItems: 1
+
+ lanes-per-direction:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ default: 2
+ description:
+ Number of lanes available per direction. Note that it is assume same
+ number of lanes is used both directions at once.
+
+ vdd-hba-supply:
+ description:
+ Phandle to UFS host controller supply regulator node.
+
+ vcc-supply:
+ description:
+ Phandle to VCC supply regulator node.
+
+ vccq-supply:
+ description:
+ Phandle to VCCQ supply regulator node.
+
+ vccq2-supply:
+ description:
+ Phandle to VCCQ2 supply regulator node.
+
+ vcc-supply-1p8:
+ type: boolean
+ description:
+ For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+ boolean property when set, specifies to use low voltage range of
+ 1.7-1.95V. Note for external UFS cards this property is invalid and valid
+ VCC range is always 2.7-3.6V.
+
+ vcc-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCC supply.
+
+ vccq-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ supply.
+
+ vccq2-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+ freq-table: [ 'clocks' ]
+
+required:
+ - interrupts
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
index 0b83df1a5418..7e9cf4cff3d3 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -14,7 +14,7 @@ Required properties:
- clocks : List of phandle and clock specifier pairs
- clock-names : List of clock input name strings sorted in the same
order as the clocks property. "ref_clk", "phy_clk" is optional
-- freq-table-hz : Array of <min max> operating frequencies stored in the same
+- freq-table : Array of <min max> operating frequencies stored in the same
order as the clocks property. If this property is not
defined or a value in the array is "0" then it is assumed
that the frequency is set by the parent clock or a
@@ -35,7 +35,7 @@ Example:
clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
clock-names = "ref_clk", "phy_clk";
- freq-table-hz = <0 0>, <0 0>;
+ freq-table = <0 0 0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
diff --git a/MAINTAINERS b/MAINTAINERS
index cae5b0c8400d..542174f434ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20015,6 +20015,7 @@ R: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
R: Avri Altman <avri.altman@xxxxxxx>
L: linux-scsi@xxxxxxxxxxxxxxx
S: Supported
+F: Documentation/devicetree/bindings/ufs/
F: Documentation/scsi/ufs.rst
F: drivers/scsi/ufs/
--
2.32.0
