Convert the S3C64xx SPI host to use GPIO descriptors.
In the process we tear out some unused code in the machine,
such as the unused config options for SPI controller 1 and
2. New systems should use the device tree boot to enable these
SPI hosts.
We drop the ability to pass a custom pin config function
to the device while registering since nothing was using this.
Provide GPIO descriptor tables for the one user with CS
0 and 1.
Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
Cc: Sylwester Nawrocki <snawrocki@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/mach-s3c/Kconfig | 12 ----
arch/arm/mach-s3c/devs.c | 77 +----------------------
arch/arm/mach-s3c/mach-crag6410-module.c | 13 ----
arch/arm/mach-s3c/mach-crag6410.c | 13 +++-
arch/arm/mach-s3c/setup-spi-s3c64xx.c | 9 ---
arch/arm/mach-s3c/spi-core-s3c24xx.h | 6 --
drivers/spi/spi-s3c64xx.c | 50 ++++-----------
include/linux/platform_data/spi-s3c64xx.h | 16 +----
8 files changed, 27 insertions(+), 169 deletions(-)
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 25606e668cf9..1899fc3f44fd 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -191,18 +191,6 @@ config S3C64XX_DEV_SPI0
Compile in platform device definitions for S3C64XX's type
SPI controller 0
-config S3C64XX_DEV_SPI1
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 1
-
-config S3C64XX_DEV_SPI2
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 2
-
config SAMSUNG_DEV_TS
bool
help
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 06dec64848f9..1e266fc24f9b 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -1107,8 +1107,7 @@ struct platform_device s3c64xx_device_spi0 = {
},
};
-void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
+void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs)
{
struct s3c64xx_spi_info pd;
@@ -1120,80 +1119,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+ pd.cfg_gpio = s3c64xx_spi0_cfg_gpio;
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
}
#endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c6410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
- .resource = s3c64xx_spi1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
- .name = "s3c6410-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
- .resource = s3c64xx_spi2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 407ad493493e..5d1d4b67a4b7 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,10 +32,6 @@
#include "crag6410.h"
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
- .line = S3C64XX_GPC(3),
-};
-
static struct wm0010_pdata wm0010_pdata = {
.gpio_reset = S3C64XX_GPN(6),
.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
@@ -49,7 +45,6 @@ static struct spi_board_info wm1253_devs[] = {
.chip_select = 0,
.mode = SPI_MODE_0,
.irq = S3C_EINT(4),
- .controller_data = &wm0010_spi_csinfo,
.platform_data = &wm0010_pdata,
},
};
@@ -62,7 +57,6 @@ static struct spi_board_info balblair_devs[] = {
.chip_select = 0,
.mode = SPI_MODE_0,
.irq = S3C_EINT(4),
- .controller_data = &wm0010_spi_csinfo,
.platform_data = &wm0010_pdata,
},
};
@@ -229,10 +223,6 @@ static struct arizona_pdata wm5102_reva_pdata = {
},
};
-static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
- .line = S3C64XX_GPN(5),
-};
-
static struct spi_board_info wm5102_reva_spi_devs[] = {
[0] = {
.modalias = "wm5102",
@@ -242,7 +232,6 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
.mode = SPI_MODE_0,
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
.platform_data = &wm5102_reva_pdata,
},
};
@@ -275,7 +264,6 @@ static struct spi_board_info wm5102_spi_devs[] = {
.mode = SPI_MODE_0,
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
.platform_data = &wm5102_pdata,
},
};
@@ -298,7 +286,6 @@ static struct spi_board_info wm5110_spi_devs[] = {
.mode = SPI_MODE_0,
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
WM831X_IRQ_GPIO_2,
- .controller_data = &codec_spi_csinfo,
.platform_data = &wm5102_reva_pdata,
},
};
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 4a12c75d407f..e3e0fe897bcc 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -825,6 +825,15 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
+static struct gpiod_lookup_table crag_spi0_gpiod_table = {
+ .dev_id = "s3c6410-spi.0",
+ .table = {
+ GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init crag6410_machine_init(void)
{
/* Open drain IRQs need pullups */
@@ -856,7 +865,9 @@ static void __init crag6410_machine_init(void)
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
- s3c64xx_spi0_set_platdata(NULL, 0, 2);
+
+ gpiod_add_lookup_table(&crag_spi0_gpiod_table);
+ s3c64xx_spi0_set_platdata(0, 2);
pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
diff --git a/arch/arm/mach-s3c/setup-spi-s3c64xx.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
index efcf78d41585..497aff71c29c 100644
--- a/arch/arm/mach-s3c/setup-spi-s3c64xx.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -16,12 +16,3 @@ int s3c64xx_spi0_cfg_gpio(void)
return 0;
}
#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
index 057667469cc3..919c5fd0c9af 100644
--- a/arch/arm/mach-s3c/spi-core-s3c24xx.h
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -16,12 +16,6 @@ static inline void s3c24xx_spi_setname(char *name)
#ifdef CONFIG_S3C64XX_DEV_SPI0
s3c64xx_device_spi0.name = name;
#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI1
- s3c64xx_device_spi1.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI2
- s3c64xx_device_spi2.name = name;
-#endif
}
#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 8755cd85e83c..5e03c9144bfe 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -13,10 +13,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
-#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/platform_data/spi-s3c64xx.h>
@@ -655,6 +653,9 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master,
struct spi_device *spi = msg->spi;
struct s3c64xx_spi_csinfo *cs = spi->controller_data;
+ if (!cs)
+ return 0;
+
/* Configure feedback delay */
writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
@@ -830,34 +831,16 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
if (spi->dev.of_node) {
cs = s3c64xx_get_slave_ctrldata(spi);
spi->controller_data = cs;
- } else if (cs) {
- /* On non-DT platforms the SPI core will set spi->cs_gpio
- * to -ENOENT. The GPIO pin used to drive the chip select
- * is defined by using platform data so spi->cs_gpio value
- * has to be override to have the proper GPIO pin number.
- */
- spi->cs_gpio = cs->line;
}
- if (IS_ERR_OR_NULL(cs)) {
+ /* NULL is fine, we just avoid using the FB delay (=0) */
+ if (IS_ERR(cs)) {
dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
return -ENODEV;
}
- if (!spi_get_ctldata(spi)) {
- if (gpio_is_valid(spi->cs_gpio)) {
- err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH,
- dev_name(&spi->dev));
- if (err) {
- dev_err(&spi->dev,
- "Failed to get /CS gpio [%d]: %d\n",
- spi->cs_gpio, err);
- goto err_gpio_req;
- }
- }
-
+ if (!spi_get_ctldata(spi))
spi_set_ctldata(spi, cs);
- }
pm_runtime_get_sync(&sdd->pdev->dev);
@@ -909,11 +892,9 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
/* setup() returns with device de-selected */
s3c64xx_spi_set_cs(spi, false);
- if (gpio_is_valid(spi->cs_gpio))
- gpio_free(spi->cs_gpio);
spi_set_ctldata(spi, NULL);
-err_gpio_req:
+ /* This was dynamically allocated on the DT path */
if (spi->dev.of_node)
kfree(cs);
@@ -924,19 +905,9 @@ static void s3c64xx_spi_cleanup(struct spi_device *spi)
{
struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
- if (gpio_is_valid(spi->cs_gpio)) {
- gpio_free(spi->cs_gpio);
- if (spi->dev.of_node)
- kfree(cs);
- else {
- /* On non-DT platforms, the SPI core sets
- * spi->cs_gpio to -ENOENT and .setup()
- * overrides it with the GPIO pin value
- * passed using platform data.
- */
- spi->cs_gpio = -ENOENT;
- }
- }
+ /* This was dynamically allocated on the DT path */
+ if (spi->dev.of_node)
+ kfree(cs);
spi_set_ctldata(spi, NULL);
}
@@ -1131,6 +1102,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
master->prepare_message = s3c64xx_spi_prepare_message;
master->transfer_one = s3c64xx_spi_transfer_one;
master->num_chipselect = sci->num_cs;
+ master->use_gpio_descriptors = true;
master->dma_alignment = 8;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
SPI_BPW_MASK(8);
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index 773daf7915a3..391f4dc68742 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -16,15 +16,13 @@ struct platform_device;
* struct s3c64xx_spi_csinfo - ChipSelect description
* @fb_delay: Slave specific feedback delay.
* Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
*
- * This is per SPI-Slave Chipselect information.
+ * This is per SPI-Slave FB delay information.
* Allocate and initialize one in machine init code and make the
* spi_board_info.controller_data point to it.
*/
struct s3c64xx_spi_csinfo {
u8 fb_delay;
- unsigned line;
};
/**
@@ -43,26 +41,16 @@ struct s3c64xx_spi_info {
/**
* s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
+extern void s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs);
/* defined by architecture to configure gpio */
extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
#endif /*__SPI_S3C64XX_H */
--
2.34.1
