Re: [PATCH v2 20/28] arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 11 Jan 2022 at 22:18, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxxxxx> wrote:
>
> Align the pin controller related nodes with dtschema.  No functional
> change expected.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> ---

Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>

>  .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 50 +++++++++----------
>  1 file changed, 25 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
> index 2407b03b5404..ef0349d1c3d0 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
> @@ -11,7 +11,7 @@
>  #include <dt-bindings/pinctrl/samsung.h>
>
>  &pinctrl_alive {
> -       gpa0: gpa0 {
> +       gpa0: gpa0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>                 interrupt-controller;
> @@ -27,7 +27,7 @@ gpa0: gpa0 {
>                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>         };
>
> -       gpa1: gpa1 {
> +       gpa1: gpa1-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>                 interrupt-controller;
> @@ -47,7 +47,7 @@ dp1_hpd: dp1-hpd-pins {
>                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>         };
>
> -       gpq0: gpq0 {
> +       gpq0: gpq0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -69,7 +69,7 @@ speedy1_bus: speedy1-bus-pins {
>  };
>
>  &pinctrl_aud {
> -       gpb0: gpb0 {
> +       gpb0: gpb0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -77,7 +77,7 @@ gpb0: gpb0 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpb1: gpb1 {
> +       gpb1: gpb1-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -85,7 +85,7 @@ gpb1: gpb1 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpb2: gpb2 {
> +       gpb2: gpb2-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -93,7 +93,7 @@ gpb2: gpb2 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpb3: gpb3 {
> +       gpb3: gpb3-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -199,7 +199,7 @@ aud_i2s6_idle: aaud-i2s6-idle-pins {
>  };
>
>  &pinctrl_fsys0 {
> -       gpf0: gpf0 {
> +       gpf0: gpf0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -207,7 +207,7 @@ gpf0: gpf0 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpf1: gpf1 {
> +       gpf1: gpf1-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -355,7 +355,7 @@ pcie_perst5_in: pcie-perst5-in-pins {
>  };
>
>  &pinctrl_fsys1 {
> -       gpf8: gpf8 {
> +       gpf8: gpf8-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -393,7 +393,7 @@ sd2_bus4: sd2-bus-width4-pins {
>  };
>
>  &pinctrl_fsys2 {
> -       gpf2: gpf2 {
> +       gpf2: gpf2-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -401,7 +401,7 @@ gpf2: gpf2 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpf3: gpf3 {
> +       gpf3: gpf3-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -409,7 +409,7 @@ gpf3: gpf3 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpf4: gpf4 {
> +       gpf4: gpf4-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -417,7 +417,7 @@ gpf4: gpf4 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpf5: gpf5 {
> +       gpf5: gpf5-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -425,7 +425,7 @@ gpf5: gpf5 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpf6: gpf6 {
> +       gpf6: gpf6-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -499,7 +499,7 @@ eth1_pps_out: eth1-pps-out-pins {
>  };
>
>  &pinctrl_peric0 {
> -       gpp0: gpp0 {
> +       gpp0: gpp0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -507,7 +507,7 @@ gpp0: gpp0 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpp1: gpp1 {
> +       gpp1: gpp1-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -515,7 +515,7 @@ gpp1: gpp1 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpp2: gpp2 {
> +       gpp2: gpp2-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -523,7 +523,7 @@ gpp2: gpp2 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpg0: gpg0 {
> +       gpg0: gpg0-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -833,7 +833,7 @@ uart5_bus_dual: uart5-bus-dual-pins {
>  };
>
>  &pinctrl_peric1 {
> -       gpp3: gpp3 {
> +       gpp3: gpp3-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -841,7 +841,7 @@ gpp3: gpp3 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpp4: gpp4 {
> +       gpp4: gpp4-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -849,7 +849,7 @@ gpp4: gpp4 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpp5: gpp5 {
> +       gpp5: gpp5-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -857,7 +857,7 @@ gpp5: gpp5 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpg1: gpg1 {
> +       gpg1: gpg1-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -865,7 +865,7 @@ gpg1: gpg1 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpg2: gpg2 {
> +       gpg2: gpg2-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> @@ -873,7 +873,7 @@ gpg2: gpg2 {
>                 #interrupt-cells = <2>;
>         };
>
> -       gpg3: gpg3 {
> +       gpg3: gpg3-gpio-bank {
>                 gpio-controller;
>                 #gpio-cells = <2>;
>
> --
> 2.32.0
>



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux