On 10/01/2022 08:54, Chanho Park wrote: >> >> The error message is valid - correctly points to wrong configuration. >> All pinctrl nodes should have one interrupt, if they have GPIOs capable of >> interrupt as a function (usually 0xf as GPIO CON register). Why >> pinctrl_aud does not have it? Maybe the function EXT_INT (0xf) is not >> available for its pins? > > Regarding pinctrl_aud, the interrupt number is not defined in interrupt source table because the line is not connected to CPU's GIC. It is directed to the GIC of dedicated audio subsystem which name is ABOX. So, we cannot handle the interrupt of pinctrl_aud even though GPBx_CON registers have EXT_INT(0xf) setting. Thanks for checking. I will need to include this in the dtschema. Best regards, Krzysztof
