On Tue, Dec 28, 2021 at 05:43:04PM +0100, Krzysztof Kozlowski wrote:
> Convert the regulators of Maxim MAX77802 PMIC to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> ---
> .../bindings/regulator/max77802.txt | 111 ----------------
> .../bindings/regulator/maxim,max77802.yaml | 118 ++++++++++++++++++
> 2 files changed, 118 insertions(+), 111 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
> deleted file mode 100644
> index b82943d83677..000000000000
> --- a/Documentation/devicetree/bindings/regulator/max77802.txt
> +++ /dev/null
> @@ -1,111 +0,0 @@
> -Binding for Maxim MAX77802 regulators
> -
> -This is a part of device tree bindings of MAX77802 multi-function device.
> -More information can be found in bindings/mfd/max77802.txt file.
> -
> -The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
> -regulators that can be controlled over I2C.
> -
> -Following properties should be present in main device node of the MFD chip.
> -
> -Optional properties:
> -- inb1-supply: The input supply for BUCK1
> -- inb2-supply: The input supply for BUCK2
> -- inb3-supply: The input supply for BUCK3
> -- inb4-supply: The input supply for BUCK4
> -- inb5-supply: The input supply for BUCK5
> -- inb6-supply: The input supply for BUCK6
> -- inb7-supply: The input supply for BUCK7
> -- inb8-supply: The input supply for BUCK8
> -- inb9-supply: The input supply for BUCK9
> -- inb10-supply: The input supply for BUCK10
> -- inl1-supply: The input supply for LDO8 and LDO15
> -- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35
> -- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7
> -- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14
> -- inl5-supply: The input supply for LDO9 and LDO19
> -- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33
> -- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29
> -- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
> -- inl10-supply: The input supply for LDO1 and LDO2
> -
> -Optional nodes:
> -- regulators : The regulators of max77802 have to be instantiated
> - under subnode named "regulators" using the following format.
> -
> - regulator-name {
> - standard regulator constraints....
> - };
> - refer Documentation/devicetree/bindings/regulator/regulator.txt
> -
> -The regulator node name should be initialized with a string to get matched
> -with their hardware counterparts as follow. The valid names are:
> -
> - -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
> - and 32-35.
> - example: LDO1, LDO2, LDO35.
> - -BUCKn : for BUCKs, where n can lie in range 1 to 10.
> - example: BUCK1, BUCK5, BUCK10.
> -
> -The max77802 regulator supports two different operating modes: Normal and Low
> -Power Mode. Some regulators support the modes to be changed at startup or by
> -the consumers during normal operation while others only support to change the
> -mode during system suspend. The standard regulator suspend states binding can
> -be used to configure the regulator operating mode.
> -
> -The regulators that support the standard "regulator-initial-mode" property,
> -changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
> -
> -The possible values for "regulator-initial-mode" and "regulator-mode" are:
> - 1: Normal regulator voltage output mode.
> - 3: Low Power which reduces the quiescent current down to only 1uA
> -
> -The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
> -header and can be included by device tree source files.
> -
> -The standard "regulator-mode" property can only be used for regulators that
> -support changing their mode to Low Power Mode during suspend. These regulators
> -are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
> -been enabled for the given suspend state using "regulator-on-in-suspend" and
> -has not been disabled for that state using "regulator-off-in-suspend".
> -
> -Example:
> -
> - max77802@9 {
> - compatible = "maxim,max77802";
> - interrupt-parent = <&wakeup_eint>;
> - interrupts = <26 0>;
> - reg = <0x09>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - inb1-supply = <&parent_reg>;
> -
> - regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "vdd_1v0";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - regulator-initial-mode = <MAX77802_OPMODE_LP>;
> - };
> -
> - ldo11_reg: LDO11 {
> - regulator-name = "vdd_ldo11";
> - regulator-min-microvolt = <1900000>;
> - regulator-max-microvolt = <1900000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-mode = <MAX77802_OPMODE_LP>;
> - };
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "vdd_mif";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
> new file mode 100644
> index 000000000000..01e1c40685ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
> @@ -0,0 +1,118 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim MAX77802 Power Management IC regulators
> +
> +maintainers:
> + - Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> +
> +description: |
> + This is a part of device tree bindings for Maxim MAX77802 Power Management
> + Integrated Circuit (PMIC).
> +
> + The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
> + regulators.
> +
> + See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
> + additional information and example.
> +
> + Certain regulators support "regulator-initial-mode" and "regulator-mode".
> + The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
> + and their meaning is:
> + 1 - Normal regulator voltage output mode.
> + 3 - Low Power which reduces the quiescent current down to only 1uA
> +
> + The standard "regulator-mode" property can only be used for regulators that
> + support changing their mode to Low Power Mode during suspend. These
> + regulators are: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
> + regulator has been enabled for the given suspend state using
> + "regulator-on-in-suspend" and has not been disabled for that state using
> + "regulator-off-in-suspend".
> +
> +patternProperties:
> + # LDO1, LDO3, LDO20, LDO21
> + "^LDO([13]|2[01])$":
> + type: object
> + $ref: regulator.yaml#
> + unevaluatedProperties: false
> + description:
> + LDOs supporting the regulator-initial-mode property and changing their
> + mode during normal operation.
> +
> + properties:
> + regulator-initial-mode: true
Same issues here as the other series.
> +
> + patternProperties:
> + regulator-state-(standby|mem|disk):
> + type: object
> + properties:
> + regulator-mode: true
Is this the only valid property?
> +
> + required:
> + - regulator-name
> +
> + # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
> + "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
> + type: object
> + $ref: regulator.yaml#
> + unevaluatedProperties: false
> + description:
> + LDOs supporting the regulator-mode property (changing mode to Low Power
> + Mode during suspend).
> +
> + properties:
> + regulator-initial-mode: false
> +
> + patternProperties:
> + regulator-state-(standby|mem|disk):
> + type: object
> + properties:
> + regulator-mode: true
> +
> + required:
> + - regulator-name
> +
> + # buck2-4
> + "^BUCK[2-4]$":
> + type: object
> + $ref: regulator.yaml#
> + unevaluatedProperties: false
> + description:
> + bucks supporting the regulator-mode property (changing mode to Low Power
> + Mode during suspend).
> +
> + properties:
> + regulator-initial-mode: false
> +
> + patternProperties:
> + regulator-state-(standby|mem|disk):
> + type: object
> + properties:
> + regulator-mode: true
> +
> + required:
> + - regulator-name
> +
> + # buck1, buck5-10
> + "^BUCK([15-9]|10)$":
> + type: object
> + $ref: regulator.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + regulator-initial-mode: false
> +
> + patternProperties:
> + regulator-state-(standby|mem|disk):
> + type: object
> + properties:
> + regulator-mode: false
> +
> + required:
> + - regulator-name
> +
> +additionalProperties: false
> --
> 2.32.0
>
>
