The newly introduced dtschema for MAX77843 MUIC require the children to
have proper naming and a port@0 property.
This should not have actual impact on MFD children driver binding,
because the max77843 MFD driver uses compatibles. The port@0 is
disabled to avoid any impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
Please kindly test or even better - fix the DTS and extcon driver.
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index cbcc01a66aab..03f7c9acaacb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -858,10 +858,10 @@ pmic@66 {
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x66>;
- muic: max77843-muic {
+ muic: extcon {
compatible = "maxim,max77843-muic";
- musb_con: musb-connector {
+ musb_con: connector {
compatible = "samsung,usb-connector-11pin",
"usb-b-connector";
label = "micro-USB";
@@ -871,6 +871,17 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ /*
+ * TODO: The DTS this is based on does not have
+ * port@0 which is a required property. The ports
+ * look incomplete and need fixing.
+ * Add a disabled port just to satisfy dtschema.
+ */
+ reg = <0>;
+ status = "disabled";
+ };
+
port@3 {
reg = <3>;
musb_con_to_mhl: endpoint {
@@ -910,7 +921,7 @@ charger_reg: CHARGER {
};
};
- haptic: max77843-haptic {
+ haptic: motor-driver {
compatible = "maxim,max77843-haptic";
haptic-supply = <&ldo38_reg>;
pwms = <&pwm 0 33670 0>;
--
2.32.0
