Add basic initial support for the Samsung Galaxy A8 (2018) smartphone. This phone is also known as "jackpotlte" and under the model name "SM-A530F". In its current state this should work on most if not all Exynos7885 phones/devices released. As of now, it supports I2C nodes (all disabled by default) and UART console with basic clock support in place. To access the UART console on the A8, there are two methods: -You can open up the device and solder directly to some debug pins close to the display connector. -Through I2C you can set the S2MU004 MFD chip to multiplex the SoC's UART lines to the d+ and d- on the USB Type-C port of the device. Note that UART works on 1.8 volts, so plugging in a normal USB cable while multiplexed to UART may fry the SoC. Everything was tested through UART by using a minimal driver that sets the S2MU004 to multiplex UART. The preferred way to boot this device is by using my Minimal S-Boot Wrapper [1] to work around some issues caused by the stock, and non-replacable Samsung S-Boot bootloader. Changes in v2: - Added R-b tags by Krzysztof Kozlowski - Moved dt-bindings patches to the beginning of the series - Fixed double : in 7885 CMU bindings - Fixed multiple double line breaks - Made Exynos850 and 7885 clock drivers share some code in a new patch - Lots of dts/dtsi fixes Changes in v3: - Fix SPDX comment style in clk-exynos-arm64.h - Fix typo in dts comment [1] https://github.com/VDavid003/minimal_sboot_wrapper David Virag (7): dt-bindings: clock: Add bindings definitions for Exynos7885 CMU dt-bindings: clock: Document Exynos7885 CMU bindings dt-bindings: arm: samsung: document jackpotlte board binding clk: samsung: Make exynos850_register_cmu shared clk: samsung: clk-pll: Add support for pll1417x clk: samsung: Add initial Exynos7885 clock driver arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC .../bindings/arm/samsung/samsung-boards.yaml | 6 + .../clock/samsung,exynos7885-clock.yaml | 166 ++++ arch/arm64/boot/dts/exynos/Makefile | 7 +- .../boot/dts/exynos/exynos7885-jackpotlte.dts | 95 ++ .../boot/dts/exynos/exynos7885-pinctrl.dtsi | 865 ++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos7885.dtsi | 438 +++++++++ drivers/clk/samsung/Makefile | 2 + drivers/clk/samsung/clk-exynos-arm64.c | 94 ++ drivers/clk/samsung/clk-exynos-arm64.h | 20 + drivers/clk/samsung/clk-exynos7885.c | 593 ++++++++++++ drivers/clk/samsung/clk-exynos850.c | 94 +- drivers/clk/samsung/clk-pll.c | 1 + drivers/clk/samsung/clk-pll.h | 1 + include/dt-bindings/clock/exynos7885.h | 115 +++ 14 files changed, 2404 insertions(+), 93 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts create mode 100644 arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos7885.dtsi create mode 100644 drivers/clk/samsung/clk-exynos-arm64.c create mode 100644 drivers/clk/samsung/clk-exynos-arm64.h create mode 100644 drivers/clk/samsung/clk-exynos7885.c create mode 100644 include/dt-bindings/clock/exynos7885.h -- 2.34.1
