[PATCH v2 1/2] ARM: dts: exynos/i9100: Fix BCM4330 Bluetooth reset polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset GPIO was marked active-high, which is against what's specified
in the documentation. Mark the reset GPIO as active-low. With this
change, Bluetooth can now be used on the i9100.

Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/exynos4210-i9100.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 55922176807e..5f5d9b135736 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -827,7 +827,7 @@ bluetooth {
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
-- 
2.33.0




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux