In order to avoid any probe ordering issue, the best practice is to move the secondary MIPI-DSI device registration and attachment to the MIPI-DSI host at probe time. Let's do this. Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/bridge/tc358775.c | 37 +++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c index 35e66d1b6456..2c76331b251d 100644 --- a/drivers/gpu/drm/bridge/tc358775.c +++ b/drivers/gpu/drm/bridge/tc358775.c @@ -594,11 +594,26 @@ static int tc_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) { struct tc_data *tc = bridge_to_tc(bridge); + + /* Attach the panel-bridge to the dsi bridge */ + return drm_bridge_attach(bridge->encoder, tc->panel_bridge, + &tc->bridge, flags); +} + +static const struct drm_bridge_funcs tc_bridge_funcs = { + .attach = tc_bridge_attach, + .pre_enable = tc_bridge_pre_enable, + .enable = tc_bridge_enable, + .mode_valid = tc_mode_valid, + .post_disable = tc_bridge_post_disable, +}; + +static int tc_attach_host(struct tc_data *tc) +{ struct device *dev = &tc->i2c->dev; struct mipi_dsi_host *host; struct mipi_dsi_device *dsi; int ret; - const struct mipi_dsi_device_info info = { .type = "tc358775", .channel = 0, .node = NULL, @@ -628,19 +643,9 @@ static int tc_bridge_attach(struct drm_bridge *bridge, return ret; } - /* Attach the panel-bridge to the dsi bridge */ - return drm_bridge_attach(bridge->encoder, tc->panel_bridge, - &tc->bridge, flags); + return 0; } -static const struct drm_bridge_funcs tc_bridge_funcs = { - .attach = tc_bridge_attach, - .pre_enable = tc_bridge_pre_enable, - .enable = tc_bridge_enable, - .mode_valid = tc_mode_valid, - .post_disable = tc_bridge_post_disable, -}; - static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; @@ -704,7 +709,15 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) i2c_set_clientdata(client, tc); + ret = tc_attach_host(tc); + if (ret) + goto err_bridge_remove; + return 0; + +err_bridge_remove: + drm_bridge_remove(&tc->bridge); + return ret; } static int tc_remove(struct i2c_client *client) -- 2.31.1