Re: [PATCH v3 5/5] clk: samsung: Introduce Exynos850 clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sylwester,

On Fri, 8 Oct 2021 at 18:44, Sam Protsenko <semen.protsenko@xxxxxxxxxx> wrote:
>
> This is the initial implementation adding only basic clocks like UART,
> MMC, I2C and corresponding parent clocks. Design is influenced by
> Exynos5433 clock driver.
>
> Bus clock is enabled by default (in probe function) for all CMUs except
> CMU_TOP, the reasoning is as follows. By default if bus clock has no
> users its "enable count" value is 0. It might be actually running if
> it's already enabled in bootloader, but then in some cases it can be
> disabled by mistake. For example, such case was observed when
> dw_mci_probe() enabled the bus clock, then failed to do something and
> disabled that bus clock on error path. After that, even the attempt to
> read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock
> ended up being disabled and it wasn't possible to access CMU registers
> anymore.
>
> To avoid such cases, CMU driver must increment the ref count for that
> bus clock by running clk_prepare_enable(). There is already existing
> '.clk_name' field in struct samsung_cmu_info, exactly for that reason.
> It was added in commit 523d3de41f02 ("clk: samsung: exynos5433: Add
> support for runtime PM"), with next mentioning in commit message:
>
>   > Also for each CMU there is one special parent clock, which has to be
>   > enabled all the time when any access to CMU registers is being done.
>
> But that clock is actually only enabled in Exynos5433 clock driver right
> now. So the same code is added to exynos850_cmu_probe() function,
> As was described above, it might be helpful not only for PM reasons, but
> also to prevent possible erroneous clock gating on error paths.
>
> Another way to workaround that issue would be to use CLOCK_IS_CRITICAL
> flag for corresponding gate clocks. But that might be not very good
> design decision, as we might still want to disable that bus clock, e.g.
> on PM suspend.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> ---

Can we also apply this one?

> Changes in v3:
>   - Added R-b tag by Krzysztof Kozlowski
>
> Changes in v2:
>   - Used of_iomap() for the whole CMU range instead of ioremap() in
>     exynos850_init_clocks()
>   - Used readl/writel functions in exynos850_init_clocks() for consistency
>     with other drivers
>   - Added all clock ids
>   - Added CMU_DPU
>   - Implemented platform_driver for all Power Domain capable CMUs
>   - Moved bus clock enablement code here to probe function
>   - Used clk_get() instead of __clk_lookup()
>
>  drivers/clk/samsung/Makefile        |   1 +
>  drivers/clk/samsung/clk-exynos850.c | 835 ++++++++++++++++++++++++++++
>  2 files changed, 836 insertions(+)
>  create mode 100644 drivers/clk/samsung/clk-exynos850.c
>
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 028b2e27a37e..c46cf11e4d0b 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o
>  obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
>  obj-$(CONFIG_EXYNOS_CLKOUT)    += clk-exynos-clkout.o
>  obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)  += clk-exynos7.o
> +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK)  += clk-exynos850.o
>  obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
>  obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
>  obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> new file mode 100644
> index 000000000000..2294989e244c
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-exynos850.c
> @@ -0,0 +1,835 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2021 Linaro Ltd.
> + * Author: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> + *
> + * Common Clock Framework support for Exynos850 SoC.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +
> +#include <dt-bindings/clock/exynos850.h>
> +
> +#include "clk.h"
> +
> +/* Gate register bits */
> +#define GATE_MANUAL            BIT(20)
> +#define GATE_ENABLE_HWACG      BIT(28)
> +
> +/* Gate register offsets range */
> +#define GATE_OFF_START         0x2000
> +#define GATE_OFF_END           0x2fff
> +
> +/**
> + * exynos850_init_clocks - Set clocks initial configuration
> + * @np:                        CMU device tree node with "reg" property (CMU addr)
> + * @reg_offs:          Register offsets array for clocks to init
> + * @reg_offs_len:      Number of register offsets in reg_offs array
> + *
> + * Set manual control mode for all gate clocks.
> + */
> +static void __init exynos850_init_clocks(struct device_node *np,
> +               const unsigned long *reg_offs, size_t reg_offs_len)
> +{
> +       void __iomem *reg_base;
> +       size_t i;
> +
> +       reg_base = of_iomap(np, 0);
> +       if (!reg_base)
> +               panic("%s: failed to map registers\n", __func__);
> +
> +       for (i = 0; i < reg_offs_len; ++i) {
> +               void __iomem *reg = reg_base + reg_offs[i];
> +               u32 val;
> +
> +               /* Modify only gate clock registers */
> +               if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> +                       continue;
> +
> +               val = readl(reg);
> +               val |= GATE_MANUAL;
> +               val &= ~GATE_ENABLE_HWACG;
> +               writel(val, reg);
> +       }
> +
> +       iounmap(reg_base);
> +}
> +
> +/* ---- CMU_TOP ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_TOP (0x120e0000) */
> +#define PLL_LOCKTIME_PLL_MMC                   0x0000
> +#define PLL_LOCKTIME_PLL_SHARED0               0x0004
> +#define PLL_LOCKTIME_PLL_SHARED1               0x0008
> +#define PLL_CON0_PLL_MMC                       0x0100
> +#define PLL_CON3_PLL_MMC                       0x010c
> +#define PLL_CON0_PLL_SHARED0                   0x0140
> +#define PLL_CON3_PLL_SHARED0                   0x014c
> +#define PLL_CON0_PLL_SHARED1                   0x0180
> +#define PLL_CON3_PLL_SHARED1                   0x018c
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS                0x1014
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_CCI                0x1018
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD   0x101c
> +#define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS                0x1020
> +#define CLK_CON_MUX_MUX_CLKCMU_DPU             0x1034
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS         0x103c
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD    0x1040
> +#define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD    0x1044
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_BUS                0x1070
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_IP         0x1074
> +#define CLK_CON_MUX_MUX_CLKCMU_PERI_UART       0x1078
> +#define CLK_CON_DIV_CLKCMU_CORE_BUS            0x1820
> +#define CLK_CON_DIV_CLKCMU_CORE_CCI            0x1824
> +#define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD       0x1828
> +#define CLK_CON_DIV_CLKCMU_CORE_SSS            0x182c
> +#define CLK_CON_DIV_CLKCMU_DPU                 0x1840
> +#define CLK_CON_DIV_CLKCMU_HSI_BUS             0x1848
> +#define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD                0x184c
> +#define CLK_CON_DIV_CLKCMU_HSI_USB20DRD                0x1850
> +#define CLK_CON_DIV_CLKCMU_PERI_BUS            0x187c
> +#define CLK_CON_DIV_CLKCMU_PERI_IP             0x1880
> +#define CLK_CON_DIV_CLKCMU_PERI_UART           0x1884
> +#define CLK_CON_DIV_PLL_SHARED0_DIV2           0x188c
> +#define CLK_CON_DIV_PLL_SHARED0_DIV3           0x1890
> +#define CLK_CON_DIV_PLL_SHARED0_DIV4           0x1894
> +#define CLK_CON_DIV_PLL_SHARED1_DIV2           0x1898
> +#define CLK_CON_DIV_PLL_SHARED1_DIV3           0x189c
> +#define CLK_CON_DIV_PLL_SHARED1_DIV4           0x18a0
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS       0x201c
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_CCI       0x2020
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD  0x2024
> +#define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS       0x2028
> +#define CLK_CON_GAT_GATE_CLKCMU_DPU            0x203c
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS                0x2044
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD   0x2048
> +#define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD   0x204c
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_BUS       0x2080
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_IP                0x2084
> +#define CLK_CON_GAT_GATE_CLKCMU_PERI_UART      0x2088
> +
> +static const unsigned long top_clk_regs[] __initconst = {
> +       PLL_LOCKTIME_PLL_MMC,
> +       PLL_LOCKTIME_PLL_SHARED0,
> +       PLL_LOCKTIME_PLL_SHARED1,
> +       PLL_CON0_PLL_MMC,
> +       PLL_CON3_PLL_MMC,
> +       PLL_CON0_PLL_SHARED0,
> +       PLL_CON3_PLL_SHARED0,
> +       PLL_CON0_PLL_SHARED1,
> +       PLL_CON3_PLL_SHARED1,
> +       CLK_CON_MUX_MUX_CLKCMU_CORE_BUS,
> +       CLK_CON_MUX_MUX_CLKCMU_CORE_CCI,
> +       CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD,
> +       CLK_CON_MUX_MUX_CLKCMU_CORE_SSS,
> +       CLK_CON_MUX_MUX_CLKCMU_DPU,
> +       CLK_CON_MUX_MUX_CLKCMU_HSI_BUS,
> +       CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD,
> +       CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD,
> +       CLK_CON_MUX_MUX_CLKCMU_PERI_BUS,
> +       CLK_CON_MUX_MUX_CLKCMU_PERI_IP,
> +       CLK_CON_MUX_MUX_CLKCMU_PERI_UART,
> +       CLK_CON_DIV_CLKCMU_CORE_BUS,
> +       CLK_CON_DIV_CLKCMU_CORE_CCI,
> +       CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD,
> +       CLK_CON_DIV_CLKCMU_CORE_SSS,
> +       CLK_CON_DIV_CLKCMU_DPU,
> +       CLK_CON_DIV_CLKCMU_HSI_BUS,
> +       CLK_CON_DIV_CLKCMU_HSI_MMC_CARD,
> +       CLK_CON_DIV_CLKCMU_HSI_USB20DRD,
> +       CLK_CON_DIV_CLKCMU_PERI_BUS,
> +       CLK_CON_DIV_CLKCMU_PERI_IP,
> +       CLK_CON_DIV_CLKCMU_PERI_UART,
> +       CLK_CON_DIV_PLL_SHARED0_DIV2,
> +       CLK_CON_DIV_PLL_SHARED0_DIV3,
> +       CLK_CON_DIV_PLL_SHARED0_DIV4,
> +       CLK_CON_DIV_PLL_SHARED1_DIV2,
> +       CLK_CON_DIV_PLL_SHARED1_DIV3,
> +       CLK_CON_DIV_PLL_SHARED1_DIV4,
> +       CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
> +       CLK_CON_GAT_GATE_CLKCMU_CORE_CCI,
> +       CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD,
> +       CLK_CON_GAT_GATE_CLKCMU_CORE_SSS,
> +       CLK_CON_GAT_GATE_CLKCMU_DPU,
> +       CLK_CON_GAT_GATE_CLKCMU_HSI_BUS,
> +       CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD,
> +       CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD,
> +       CLK_CON_GAT_GATE_CLKCMU_PERI_BUS,
> +       CLK_CON_GAT_GATE_CLKCMU_PERI_IP,
> +       CLK_CON_GAT_GATE_CLKCMU_PERI_UART,
> +};
> +
> +/*
> + * Do not provide PLL tables to core PLLs, as MANUAL_PLL_CTRL bit is not set
> + * for those PLLs by default, so set_rate operation would fail.
> + */
> +static const struct samsung_pll_clock top_pll_clks[] __initconst = {
> +       /* CMU_TOP_PURECLKCOMP */
> +       PLL(pll_0822x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
> +           PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
> +           NULL),
> +       PLL(pll_0822x, CLK_FOUT_SHARED1_PLL, "fout_shared1_pll", "oscclk",
> +           PLL_LOCKTIME_PLL_SHARED1, PLL_CON3_PLL_SHARED1,
> +           NULL),
> +       PLL(pll_0831x, CLK_FOUT_MMC_PLL, "fout_mmc_pll", "oscclk",
> +           PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, NULL),
> +};
> +
> +/* List of parent clocks for Muxes in CMU_TOP */
> +PNAME(mout_shared0_pll_p)      = { "oscclk", "fout_shared0_pll" };
> +PNAME(mout_shared1_pll_p)      = { "oscclk", "fout_shared1_pll" };
> +PNAME(mout_mmc_pll_p)          = { "oscclk", "fout_mmc_pll" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_CORE */
> +PNAME(mout_core_bus_p)         = { "dout_shared1_div2", "dout_shared0_div3",
> +                                   "dout_shared1_div3", "dout_shared0_div4" };
> +PNAME(mout_core_cci_p)         = { "dout_shared0_div2", "dout_shared1_div2",
> +                                   "dout_shared0_div3", "dout_shared1_div3" };
> +PNAME(mout_core_mmc_embd_p)    = { "oscclk", "dout_shared0_div2",
> +                                   "dout_shared1_div2", "dout_shared0_div3",
> +                                   "dout_shared1_div3", "mout_mmc_pll",
> +                                   "oscclk", "oscclk" };
> +PNAME(mout_core_sss_p)         = { "dout_shared0_div3", "dout_shared1_div3",
> +                                   "dout_shared0_div4", "dout_shared1_div4" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */
> +PNAME(mout_hsi_bus_p)          = { "dout_shared0_div2", "dout_shared1_div2" };
> +PNAME(mout_hsi_mmc_card_p)     = { "oscclk", "dout_shared0_div2",
> +                                   "dout_shared1_div2", "dout_shared0_div3",
> +                                   "dout_shared1_div3", "mout_mmc_pll",
> +                                   "oscclk", "oscclk" };
> +PNAME(mout_hsi_usb20drd_p)     = { "oscclk", "dout_shared0_div4",
> +                                   "dout_shared1_div4", "oscclk" };
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_PERI */
> +PNAME(mout_peri_bus_p)         = { "dout_shared0_div4", "dout_shared1_div4" };
> +PNAME(mout_peri_uart_p)                = { "oscclk", "dout_shared0_div4",
> +                                   "dout_shared1_div4", "oscclk" };
> +PNAME(mout_peri_ip_p)          = { "oscclk", "dout_shared0_div4",
> +                                   "dout_shared1_div4", "oscclk" };
> +
> +/* List of parent clocks for Muxes in CMU_TOP: for CMU_DPU */
> +PNAME(mout_dpu_p)              = { "dout_shared0_div3", "dout_shared1_div3",
> +                                   "dout_shared0_div4", "dout_shared1_div4" };
> +
> +static const struct samsung_mux_clock top_mux_clks[] __initconst = {
> +       /* CMU_TOP_PURECLKCOMP */
> +       MUX(CLK_MOUT_SHARED0_PLL, "mout_shared0_pll", mout_shared0_pll_p,
> +           PLL_CON0_PLL_SHARED0, 4, 1),
> +       MUX(CLK_MOUT_SHARED1_PLL, "mout_shared1_pll", mout_shared1_pll_p,
> +           PLL_CON0_PLL_SHARED1, 4, 1),
> +       MUX(CLK_MOUT_MMC_PLL, "mout_mmc_pll", mout_mmc_pll_p,
> +           PLL_CON0_PLL_MMC, 4, 1),
> +
> +       /* CORE */
> +       MUX(CLK_MOUT_CORE_BUS, "mout_core_bus", mout_core_bus_p,
> +           CLK_CON_MUX_MUX_CLKCMU_CORE_BUS, 0, 2),
> +       MUX(CLK_MOUT_CORE_CCI, "mout_core_cci", mout_core_cci_p,
> +           CLK_CON_MUX_MUX_CLKCMU_CORE_CCI, 0, 2),
> +       MUX(CLK_MOUT_CORE_MMC_EMBD, "mout_core_mmc_embd", mout_core_mmc_embd_p,
> +           CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, 0, 3),
> +       MUX(CLK_MOUT_CORE_SSS, "mout_core_sss", mout_core_sss_p,
> +           CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, 0, 2),
> +
> +       /* DPU */
> +       MUX(CLK_MOUT_DPU, "mout_dpu", mout_dpu_p,
> +           CLK_CON_MUX_MUX_CLKCMU_DPU, 0, 2),
> +
> +       /* HSI */
> +       MUX(CLK_MOUT_HSI_BUS, "mout_hsi_bus", mout_hsi_bus_p,
> +           CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1),
> +       MUX(CLK_MOUT_HSI_MMC_CARD, "mout_hsi_mmc_card", mout_hsi_mmc_card_p,
> +           CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, 0, 3),
> +       MUX(CLK_MOUT_HSI_USB20DRD, "mout_hsi_usb20drd", mout_hsi_usb20drd_p,
> +           CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, 0, 2),
> +
> +       /* PERI */
> +       MUX(CLK_MOUT_PERI_BUS, "mout_peri_bus", mout_peri_bus_p,
> +           CLK_CON_MUX_MUX_CLKCMU_PERI_BUS, 0, 1),
> +       MUX(CLK_MOUT_PERI_UART, "mout_peri_uart", mout_peri_uart_p,
> +           CLK_CON_MUX_MUX_CLKCMU_PERI_UART, 0, 2),
> +       MUX(CLK_MOUT_PERI_IP, "mout_peri_ip", mout_peri_ip_p,
> +           CLK_CON_MUX_MUX_CLKCMU_PERI_IP, 0, 2),
> +};
> +
> +static const struct samsung_div_clock top_div_clks[] __initconst = {
> +       /* CMU_TOP_PURECLKCOMP */
> +       DIV(CLK_DOUT_SHARED0_DIV3, "dout_shared0_div3", "mout_shared0_pll",
> +           CLK_CON_DIV_PLL_SHARED0_DIV3, 0, 2),
> +       DIV(CLK_DOUT_SHARED0_DIV2, "dout_shared0_div2", "mout_shared0_pll",
> +           CLK_CON_DIV_PLL_SHARED0_DIV2, 0, 1),
> +       DIV(CLK_DOUT_SHARED1_DIV3, "dout_shared1_div3", "mout_shared1_pll",
> +           CLK_CON_DIV_PLL_SHARED1_DIV3, 0, 2),
> +       DIV(CLK_DOUT_SHARED1_DIV2, "dout_shared1_div2", "mout_shared1_pll",
> +           CLK_CON_DIV_PLL_SHARED1_DIV2, 0, 1),
> +       DIV(CLK_DOUT_SHARED0_DIV4, "dout_shared0_div4", "dout_shared0_div2",
> +           CLK_CON_DIV_PLL_SHARED0_DIV4, 0, 1),
> +       DIV(CLK_DOUT_SHARED1_DIV4, "dout_shared1_div4", "dout_shared1_div2",
> +           CLK_CON_DIV_PLL_SHARED1_DIV4, 0, 1),
> +
> +       /* CORE */
> +       DIV(CLK_DOUT_CORE_BUS, "dout_core_bus", "gout_core_bus",
> +           CLK_CON_DIV_CLKCMU_CORE_BUS, 0, 4),
> +       DIV(CLK_DOUT_CORE_CCI, "dout_core_cci", "gout_core_cci",
> +           CLK_CON_DIV_CLKCMU_CORE_CCI, 0, 4),
> +       DIV(CLK_DOUT_CORE_MMC_EMBD, "dout_core_mmc_embd", "gout_core_mmc_embd",
> +           CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, 0, 9),
> +       DIV(CLK_DOUT_CORE_SSS, "dout_core_sss", "gout_core_sss",
> +           CLK_CON_DIV_CLKCMU_CORE_SSS, 0, 4),
> +
> +       /* DPU */
> +       DIV(CLK_DOUT_DPU, "dout_dpu", "gout_dpu",
> +           CLK_CON_DIV_CLKCMU_DPU, 0, 4),
> +
> +       /* HSI */
> +       DIV(CLK_DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus",
> +           CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4),
> +       DIV(CLK_DOUT_HSI_MMC_CARD, "dout_hsi_mmc_card", "gout_hsi_mmc_card",
> +           CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, 0, 9),
> +       DIV(CLK_DOUT_HSI_USB20DRD, "dout_hsi_usb20drd", "gout_hsi_usb20drd",
> +           CLK_CON_DIV_CLKCMU_HSI_USB20DRD, 0, 4),
> +
> +       /* PERI */
> +       DIV(CLK_DOUT_PERI_BUS, "dout_peri_bus", "gout_peri_bus",
> +           CLK_CON_DIV_CLKCMU_PERI_BUS, 0, 4),
> +       DIV(CLK_DOUT_PERI_UART, "dout_peri_uart", "gout_peri_uart",
> +           CLK_CON_DIV_CLKCMU_PERI_UART, 0, 4),
> +       DIV(CLK_DOUT_PERI_IP, "dout_peri_ip", "gout_peri_ip",
> +           CLK_CON_DIV_CLKCMU_PERI_IP, 0, 4),
> +};
> +
> +static const struct samsung_gate_clock top_gate_clks[] __initconst = {
> +       /* CORE */
> +       GATE(CLK_GOUT_CORE_BUS, "gout_core_bus", "mout_core_bus",
> +            CLK_CON_GAT_GATE_CLKCMU_CORE_BUS, 21, 0, 0),
> +       GATE(CLK_GOUT_CORE_CCI, "gout_core_cci", "mout_core_cci",
> +            CLK_CON_GAT_GATE_CLKCMU_CORE_CCI, 21, 0, 0),
> +       GATE(CLK_GOUT_CORE_MMC_EMBD, "gout_core_mmc_embd", "mout_core_mmc_embd",
> +            CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, 21, 0, 0),
> +       GATE(CLK_GOUT_CORE_SSS, "gout_core_sss", "mout_core_sss",
> +            CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, 21, 0, 0),
> +
> +       /* DPU */
> +       GATE(CLK_GOUT_DPU, "gout_dpu", "mout_dpu",
> +            CLK_CON_GAT_GATE_CLKCMU_DPU, 21, 0, 0),
> +
> +       /* HSI */
> +       GATE(CLK_GOUT_HSI_BUS, "gout_hsi_bus", "mout_hsi_bus",
> +            CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI_MMC_CARD, "gout_hsi_mmc_card", "mout_hsi_mmc_card",
> +            CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI_USB20DRD, "gout_hsi_usb20drd", "mout_hsi_usb20drd",
> +            CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, 21, 0, 0),
> +
> +       /* PERI */
> +       GATE(CLK_GOUT_PERI_BUS, "gout_peri_bus", "mout_peri_bus",
> +            CLK_CON_GAT_GATE_CLKCMU_PERI_BUS, 21, 0, 0),
> +       GATE(CLK_GOUT_PERI_UART, "gout_peri_uart", "mout_peri_uart",
> +            CLK_CON_GAT_GATE_CLKCMU_PERI_UART, 21, 0, 0),
> +       GATE(CLK_GOUT_PERI_IP, "gout_peri_ip", "mout_peri_ip",
> +            CLK_CON_GAT_GATE_CLKCMU_PERI_IP, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info top_cmu_info __initconst = {
> +       .pll_clks               = top_pll_clks,
> +       .nr_pll_clks            = ARRAY_SIZE(top_pll_clks),
> +       .mux_clks               = top_mux_clks,
> +       .nr_mux_clks            = ARRAY_SIZE(top_mux_clks),
> +       .div_clks               = top_div_clks,
> +       .nr_div_clks            = ARRAY_SIZE(top_div_clks),
> +       .gate_clks              = top_gate_clks,
> +       .nr_gate_clks           = ARRAY_SIZE(top_gate_clks),
> +       .nr_clk_ids             = TOP_NR_CLK,
> +       .clk_regs               = top_clk_regs,
> +       .nr_clk_regs            = ARRAY_SIZE(top_clk_regs),
> +};
> +
> +static void __init exynos850_cmu_top_init(struct device_node *np)
> +{
> +       exynos850_init_clocks(np, top_clk_regs, ARRAY_SIZE(top_clk_regs));
> +       samsung_cmu_register_one(np, &top_cmu_info);
> +}
> +
> +CLK_OF_DECLARE(exynos850_cmu_top, "samsung,exynos850-cmu-top",
> +              exynos850_cmu_top_init);
> +
> +/* ---- CMU_HSI ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_HSI (0x13400000) */
> +#define PLL_CON0_MUX_CLKCMU_HSI_BUS_USER                       0x0600
> +#define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER                  0x0610
> +#define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER                  0x0620
> +#define CLK_CON_MUX_MUX_CLK_HSI_RTC                            0x1000
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV            0x2008
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50              0x200c
> +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26           0x2010
> +#define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK                     0x2018
> +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK                   0x2024
> +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN                  0x2028
> +#define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK                   0x2038
> +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20      0x203c
> +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY                0x2040
> +
> +static const unsigned long hsi_clk_regs[] __initconst = {
> +       PLL_CON0_MUX_CLKCMU_HSI_BUS_USER,
> +       PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
> +       PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
> +       CLK_CON_MUX_MUX_CLK_HSI_RTC,
> +       CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
> +       CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
> +       CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
> +       CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
> +       CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
> +       CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
> +       CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
> +       CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
> +       CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_PERI */
> +PNAME(mout_hsi_bus_user_p)     = { "oscclk", "dout_hsi_bus" };
> +PNAME(mout_hsi_mmc_card_user_p)        = { "oscclk", "dout_hsi_mmc_card" };
> +PNAME(mout_hsi_usb20drd_user_p)        = { "oscclk", "dout_hsi_usb20drd" };
> +PNAME(mout_hsi_rtc_p)          = { "rtcclk", "oscclk" };
> +
> +static const struct samsung_mux_clock hsi_mux_clks[] __initconst = {
> +       MUX(CLK_MOUT_HSI_BUS_USER, "mout_hsi_bus_user", mout_hsi_bus_user_p,
> +           PLL_CON0_MUX_CLKCMU_HSI_BUS_USER, 4, 1),
> +       MUX_F(CLK_MOUT_HSI_MMC_CARD_USER, "mout_hsi_mmc_card_user",
> +             mout_hsi_mmc_card_user_p, PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
> +             4, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX(CLK_MOUT_HSI_USB20DRD_USER, "mout_hsi_usb20drd_user",
> +           mout_hsi_usb20drd_user_p, PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
> +           4, 1),
> +       MUX(CLK_MOUT_HSI_RTC, "mout_hsi_rtc", mout_hsi_rtc_p,
> +           CLK_CON_MUX_MUX_CLK_HSI_RTC, 0, 1),
> +};
> +
> +static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
> +       GATE(CLK_GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
> +            CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
> +       GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
> +            CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50, 21, 0, 0),
> +       GATE(CLK_GOUT_USB_PHY_REF_CLK, "gout_usb_phy_ref", "oscclk",
> +            CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26, 21, 0, 0),
> +       GATE(CLK_GOUT_GPIO_HSI_PCLK, "gout_gpio_hsi_pclk", "mout_hsi_bus_user",
> +            CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_hsi_bus_user",
> +            CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK, 21, 0, 0),
> +       GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
> +            "mout_hsi_mmc_card_user",
> +            CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk",
> +            "mout_hsi_bus_user",
> +            CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_USB_PHY_ACLK, "gout_usb_phy_aclk", "mout_hsi_bus_user",
> +            CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20, 21, 0, 0),
> +       GATE(CLK_GOUT_USB_BUS_EARLY_CLK, "gout_usb_bus_early",
> +            "mout_hsi_bus_user",
> +            CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info hsi_cmu_info __initconst = {
> +       .mux_clks               = hsi_mux_clks,
> +       .nr_mux_clks            = ARRAY_SIZE(hsi_mux_clks),
> +       .gate_clks              = hsi_gate_clks,
> +       .nr_gate_clks           = ARRAY_SIZE(hsi_gate_clks),
> +       .nr_clk_ids             = HSI_NR_CLK,
> +       .clk_regs               = hsi_clk_regs,
> +       .nr_clk_regs            = ARRAY_SIZE(hsi_clk_regs),
> +       .clk_name               = "dout_hsi_bus",
> +};
> +
> +/* ---- CMU_PERI ------------------------------------------------------------ */
> +
> +/* Register Offset definitions for CMU_PERI (0x10030000) */
> +#define PLL_CON0_MUX_CLKCMU_PERI_BUS_USER      0x0600
> +#define PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER    0x0610
> +#define PLL_CON0_MUX_CLKCMU_PERI_SPI_USER      0x0620
> +#define PLL_CON0_MUX_CLKCMU_PERI_UART_USER     0x0630
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0       0x1800
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1       0x1804
> +#define CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2       0x1808
> +#define CLK_CON_DIV_DIV_CLK_PERI_SPI_0         0x180c
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0      0x200c
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1      0x2010
> +#define CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2      0x2014
> +#define CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK   0x2020
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK    0x2024
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK     0x2028
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK    0x202c
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK     0x2030
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK    0x2034
> +#define CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK     0x2038
> +#define CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK       0x203c
> +#define CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK       0x2040
> +#define CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK       0x2044
> +#define CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK       0x2048
> +#define CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK       0x204c
> +#define CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK       0x2050
> +#define CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK       0x2054
> +#define CLK_CON_GAT_GOUT_PERI_MCT_PCLK         0x205c
> +#define CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK   0x2064
> +#define CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK      0x209c
> +#define CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK       0x20a0
> +#define CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK 0x20a4
> +#define CLK_CON_GAT_GOUT_PERI_UART_IPCLK       0x20a8
> +#define CLK_CON_GAT_GOUT_PERI_UART_PCLK                0x20ac
> +#define CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK       0x20b0
> +#define CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK       0x20b4
> +
> +static const unsigned long peri_clk_regs[] __initconst = {
> +       PLL_CON0_MUX_CLKCMU_PERI_BUS_USER,
> +       PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER,
> +       PLL_CON0_MUX_CLKCMU_PERI_SPI_USER,
> +       PLL_CON0_MUX_CLKCMU_PERI_UART_USER,
> +       CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0,
> +       CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1,
> +       CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2,
> +       CLK_CON_DIV_DIV_CLK_PERI_SPI_0,
> +       CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0,
> +       CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1,
> +       CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2,
> +       CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK,
> +       CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_MCT_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK,
> +       CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_UART_IPCLK,
> +       CLK_CON_GAT_GOUT_PERI_UART_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK,
> +       CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_PERI */
> +PNAME(mout_peri_bus_user_p)    = { "oscclk", "dout_peri_bus" };
> +PNAME(mout_peri_uart_user_p)   = { "oscclk", "dout_peri_uart" };
> +PNAME(mout_peri_hsi2c_user_p)  = { "oscclk", "dout_peri_ip" };
> +PNAME(mout_peri_spi_user_p)    = { "oscclk", "dout_peri_ip" };
> +
> +static const struct samsung_mux_clock peri_mux_clks[] __initconst = {
> +       MUX(CLK_MOUT_PERI_BUS_USER, "mout_peri_bus_user", mout_peri_bus_user_p,
> +           PLL_CON0_MUX_CLKCMU_PERI_BUS_USER, 4, 1),
> +       MUX(CLK_MOUT_PERI_UART_USER, "mout_peri_uart_user",
> +           mout_peri_uart_user_p, PLL_CON0_MUX_CLKCMU_PERI_UART_USER, 4, 1),
> +       MUX(CLK_MOUT_PERI_HSI2C_USER, "mout_peri_hsi2c_user",
> +           mout_peri_hsi2c_user_p, PLL_CON0_MUX_CLKCMU_PERI_HSI2C_USER, 4, 1),
> +       MUX(CLK_MOUT_PERI_SPI_USER, "mout_peri_spi_user", mout_peri_spi_user_p,
> +           PLL_CON0_MUX_CLKCMU_PERI_SPI_USER, 4, 1),
> +};
> +
> +static const struct samsung_div_clock peri_div_clks[] __initconst = {
> +       DIV(CLK_DOUT_PERI_HSI2C0, "dout_peri_hsi2c0", "gout_peri_hsi2c0",
> +           CLK_CON_DIV_DIV_CLK_PERI_HSI2C_0, 0, 5),
> +       DIV(CLK_DOUT_PERI_HSI2C1, "dout_peri_hsi2c1", "gout_peri_hsi2c1",
> +           CLK_CON_DIV_DIV_CLK_PERI_HSI2C_1, 0, 5),
> +       DIV(CLK_DOUT_PERI_HSI2C2, "dout_peri_hsi2c2", "gout_peri_hsi2c2",
> +           CLK_CON_DIV_DIV_CLK_PERI_HSI2C_2, 0, 5),
> +       DIV(CLK_DOUT_PERI_SPI0, "dout_peri_spi0", "mout_peri_spi_user",
> +           CLK_CON_DIV_DIV_CLK_PERI_SPI_0, 0, 5),
> +};
> +
> +static const struct samsung_gate_clock peri_gate_clks[] __initconst = {
> +       GATE(CLK_GOUT_PERI_HSI2C0, "gout_peri_hsi2c0", "mout_peri_hsi2c_user",
> +            CLK_CON_GAT_GATE_CLK_PERI_HSI2C_0, 21, 0, 0),
> +       GATE(CLK_GOUT_PERI_HSI2C1, "gout_peri_hsi2c1", "mout_peri_hsi2c_user",
> +            CLK_CON_GAT_GATE_CLK_PERI_HSI2C_1, 21, 0, 0),
> +       GATE(CLK_GOUT_PERI_HSI2C2, "gout_peri_hsi2c2", "mout_peri_hsi2c_user",
> +            CLK_CON_GAT_GATE_CLK_PERI_HSI2C_2, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C0_IPCLK, "gout_hsi2c0_ipclk", "dout_peri_hsi2c0",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_0_IPCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C0_PCLK, "gout_hsi2c0_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_0_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C1_IPCLK, "gout_hsi2c1_ipclk", "dout_peri_hsi2c1",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_1_IPCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C1_PCLK, "gout_hsi2c1_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_1_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C2_IPCLK, "gout_hsi2c2_ipclk", "dout_peri_hsi2c2",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_2_IPCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_HSI2C2_PCLK, "gout_hsi2c2_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_HSI2C_2_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C0_PCLK, "gout_i2c0_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_0_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C1_PCLK, "gout_i2c1_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_1_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C2_PCLK, "gout_i2c2_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_2_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C3_PCLK, "gout_i2c3_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_3_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C4_PCLK, "gout_i2c4_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_4_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C5_PCLK, "gout_i2c5_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_5_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_I2C6_PCLK, "gout_i2c6_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_I2C_6_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_MCT_PCLK, "gout_mct_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_MCT_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_PWM_MOTOR_PCLK, "gout_pwm_motor_pclk",
> +            "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_PWM_MOTOR_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_SPI0_IPCLK, "gout_spi0_ipclk", "dout_peri_spi0",
> +            CLK_CON_GAT_GOUT_PERI_SPI_0_IPCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_SPI0_PCLK, "gout_spi0_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_SPI_0_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_SYSREG_PERI_PCLK, "gout_sysreg_peri_pclk",
> +            "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_SYSREG_PERI_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_UART_IPCLK, "gout_uart_ipclk", "mout_peri_uart_user",
> +            CLK_CON_GAT_GOUT_PERI_UART_IPCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_UART_PCLK, "gout_uart_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_UART_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_WDT0_PCLK, "gout_wdt0_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_WDT_0_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_WDT1_PCLK, "gout_wdt1_pclk", "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_WDT_1_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_GPIO_PERI_PCLK, "gout_gpio_peri_pclk",
> +            "mout_peri_bus_user",
> +            CLK_CON_GAT_GOUT_PERI_GPIO_PERI_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info peri_cmu_info __initconst = {
> +       .mux_clks               = peri_mux_clks,
> +       .nr_mux_clks            = ARRAY_SIZE(peri_mux_clks),
> +       .div_clks               = peri_div_clks,
> +       .nr_div_clks            = ARRAY_SIZE(peri_div_clks),
> +       .gate_clks              = peri_gate_clks,
> +       .nr_gate_clks           = ARRAY_SIZE(peri_gate_clks),
> +       .nr_clk_ids             = PERI_NR_CLK,
> +       .clk_regs               = peri_clk_regs,
> +       .nr_clk_regs            = ARRAY_SIZE(peri_clk_regs),
> +       .clk_name               = "dout_peri_bus",
> +};
> +
> +/* ---- CMU_CORE ------------------------------------------------------------ */
> +
> +/* Register Offset definitions for CMU_CORE (0x12000000) */
> +#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER      0x0600
> +#define PLL_CON0_MUX_CLKCMU_CORE_CCI_USER      0x0610
> +#define PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER 0x0620
> +#define PLL_CON0_MUX_CLKCMU_CORE_SSS_USER      0x0630
> +#define CLK_CON_MUX_MUX_CLK_CORE_GIC           0x1000
> +#define CLK_CON_DIV_DIV_CLK_CORE_BUSP          0x1800
> +#define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK     0x2038
> +#define CLK_CON_GAT_GOUT_CORE_GIC_CLK          0x2040
> +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK  0x20e8
> +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN 0x20ec
> +#define CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK       0x2128
> +#define CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK       0x212c
> +
> +static const unsigned long core_clk_regs[] __initconst = {
> +       PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
> +       PLL_CON0_MUX_CLKCMU_CORE_CCI_USER,
> +       PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER,
> +       PLL_CON0_MUX_CLKCMU_CORE_SSS_USER,
> +       CLK_CON_MUX_MUX_CLK_CORE_GIC,
> +       CLK_CON_DIV_DIV_CLK_CORE_BUSP,
> +       CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK,
> +       CLK_CON_GAT_GOUT_CORE_GIC_CLK,
> +       CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK,
> +       CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
> +       CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK,
> +       CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_CORE */
> +PNAME(mout_core_bus_user_p)            = { "oscclk", "dout_core_bus" };
> +PNAME(mout_core_cci_user_p)            = { "oscclk", "dout_core_cci" };
> +PNAME(mout_core_mmc_embd_user_p)       = { "oscclk", "dout_core_mmc_embd" };
> +PNAME(mout_core_sss_user_p)            = { "oscclk", "dout_core_sss" };
> +PNAME(mout_core_gic_p)                 = { "dout_core_busp", "oscclk" };
> +
> +static const struct samsung_mux_clock core_mux_clks[] __initconst = {
> +       MUX(CLK_MOUT_CORE_BUS_USER, "mout_core_bus_user", mout_core_bus_user_p,
> +           PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 4, 1),
> +       MUX(CLK_MOUT_CORE_CCI_USER, "mout_core_cci_user", mout_core_cci_user_p,
> +           PLL_CON0_MUX_CLKCMU_CORE_CCI_USER, 4, 1),
> +       MUX_F(CLK_MOUT_CORE_MMC_EMBD_USER, "mout_core_mmc_embd_user",
> +             mout_core_mmc_embd_user_p, PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER,
> +             4, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX(CLK_MOUT_CORE_SSS_USER, "mout_core_sss_user", mout_core_sss_user_p,
> +           PLL_CON0_MUX_CLKCMU_CORE_SSS_USER, 4, 1),
> +       MUX(CLK_MOUT_CORE_GIC, "mout_core_gic", mout_core_gic_p,
> +           CLK_CON_MUX_MUX_CLK_CORE_GIC, 0, 1),
> +};
> +
> +static const struct samsung_div_clock core_div_clks[] __initconst = {
> +       DIV(CLK_DOUT_CORE_BUSP, "dout_core_busp", "mout_core_bus_user",
> +           CLK_CON_DIV_DIV_CLK_CORE_BUSP, 0, 2),
> +};
> +
> +static const struct samsung_gate_clock core_gate_clks[] __initconst = {
> +       GATE(CLK_GOUT_CCI_ACLK, "gout_cci_aclk", "mout_core_cci_user",
> +            CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK, 21, 0, 0),
> +       GATE(CLK_GOUT_GIC_CLK, "gout_gic_clk", "mout_core_gic",
> +            CLK_CON_GAT_GOUT_CORE_GIC_CLK, 21, 0, 0),
> +       GATE(CLK_GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "dout_core_busp",
> +            CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK, 21, 0, 0),
> +       GATE(CLK_GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin",
> +            "mout_core_mmc_embd_user", CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
> +            21, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_GOUT_SSS_ACLK, "gout_sss_aclk", "mout_core_sss_user",
> +            CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK, 21, 0, 0),
> +       GATE(CLK_GOUT_SSS_PCLK, "gout_sss_pclk", "dout_core_busp",
> +            CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info core_cmu_info __initconst = {
> +       .mux_clks               = core_mux_clks,
> +       .nr_mux_clks            = ARRAY_SIZE(core_mux_clks),
> +       .div_clks               = core_div_clks,
> +       .nr_div_clks            = ARRAY_SIZE(core_div_clks),
> +       .gate_clks              = core_gate_clks,
> +       .nr_gate_clks           = ARRAY_SIZE(core_gate_clks),
> +       .nr_clk_ids             = CORE_NR_CLK,
> +       .clk_regs               = core_clk_regs,
> +       .nr_clk_regs            = ARRAY_SIZE(core_clk_regs),
> +       .clk_name               = "dout_core_bus",
> +};
> +
> +/* ---- CMU_DPU ------------------------------------------------------------- */
> +
> +/* Register Offset definitions for CMU_DPU (0x13000000) */
> +#define PLL_CON0_MUX_CLKCMU_DPU_USER           0x0600
> +#define CLK_CON_DIV_DIV_CLK_DPU_BUSP           0x1800
> +#define CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK       0x2004
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DECON0       0x2010
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DMA          0x2014
> +#define CLK_CON_GAT_GOUT_DPU_ACLK_DPP          0x2018
> +#define CLK_CON_GAT_GOUT_DPU_PPMU_ACLK         0x2028
> +#define CLK_CON_GAT_GOUT_DPU_PPMU_PCLK         0x202c
> +#define CLK_CON_GAT_GOUT_DPU_SMMU_CLK          0x2038
> +#define CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK       0x203c
> +
> +static const unsigned long dpu_clk_regs[] __initconst = {
> +       PLL_CON0_MUX_CLKCMU_DPU_USER,
> +       CLK_CON_DIV_DIV_CLK_DPU_BUSP,
> +       CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK,
> +       CLK_CON_GAT_GOUT_DPU_ACLK_DECON0,
> +       CLK_CON_GAT_GOUT_DPU_ACLK_DMA,
> +       CLK_CON_GAT_GOUT_DPU_ACLK_DPP,
> +       CLK_CON_GAT_GOUT_DPU_PPMU_ACLK,
> +       CLK_CON_GAT_GOUT_DPU_PPMU_PCLK,
> +       CLK_CON_GAT_GOUT_DPU_SMMU_CLK,
> +       CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK,
> +};
> +
> +/* List of parent clocks for Muxes in CMU_CORE */
> +PNAME(mout_dpu_user_p)         = { "oscclk", "dout_dpu" };
> +
> +static const struct samsung_mux_clock dpu_mux_clks[] __initconst = {
> +       MUX(CLK_MOUT_DPU_USER, "mout_dpu_user", mout_dpu_user_p,
> +           PLL_CON0_MUX_CLKCMU_DPU_USER, 4, 1),
> +};
> +
> +static const struct samsung_div_clock dpu_div_clks[] __initconst = {
> +       DIV(CLK_DOUT_DPU_BUSP, "dout_dpu_busp", "mout_dpu_user",
> +           CLK_CON_DIV_DIV_CLK_DPU_BUSP, 0, 3),
> +};
> +
> +static const struct samsung_gate_clock dpu_gate_clks[] __initconst = {
> +       GATE(CLK_GOUT_DPU_CMU_DPU_PCLK, "gout_dpu_cmu_dpu_pclk",
> +            "dout_dpu_busp", CLK_CON_GAT_CLK_DPU_CMU_DPU_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_DECON0_ACLK, "gout_dpu_decon0_aclk", "mout_dpu_user",
> +            CLK_CON_GAT_GOUT_DPU_ACLK_DECON0, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_DMA_ACLK, "gout_dpu_dma_aclk", "mout_dpu_user",
> +            CLK_CON_GAT_GOUT_DPU_ACLK_DMA, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_DPP_ACLK, "gout_dpu_dpp_aclk", "mout_dpu_user",
> +            CLK_CON_GAT_GOUT_DPU_ACLK_DPP, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_PPMU_ACLK, "gout_dpu_ppmu_aclk", "mout_dpu_user",
> +            CLK_CON_GAT_GOUT_DPU_PPMU_ACLK, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_PPMU_PCLK, "gout_dpu_ppmu_pclk", "dout_dpu_busp",
> +            CLK_CON_GAT_GOUT_DPU_PPMU_PCLK, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_SMMU_CLK, "gout_dpu_smmu_clk", "mout_dpu_user",
> +            CLK_CON_GAT_GOUT_DPU_SMMU_CLK, 21, 0, 0),
> +       GATE(CLK_GOUT_DPU_SYSREG_PCLK, "gout_dpu_sysreg_pclk", "dout_dpu_busp",
> +            CLK_CON_GAT_GOUT_DPU_SYSREG_PCLK, 21, 0, 0),
> +};
> +
> +static const struct samsung_cmu_info dpu_cmu_info __initconst = {
> +       .mux_clks               = dpu_mux_clks,
> +       .nr_mux_clks            = ARRAY_SIZE(dpu_mux_clks),
> +       .div_clks               = dpu_div_clks,
> +       .nr_div_clks            = ARRAY_SIZE(dpu_div_clks),
> +       .gate_clks              = dpu_gate_clks,
> +       .nr_gate_clks           = ARRAY_SIZE(dpu_gate_clks),
> +       .nr_clk_ids             = DPU_NR_CLK,
> +       .clk_regs               = dpu_clk_regs,
> +       .nr_clk_regs            = ARRAY_SIZE(dpu_clk_regs),
> +       .clk_name               = "dout_dpu",
> +};
> +
> +/* ---- platform_driver ----------------------------------------------------- */
> +
> +static int __init exynos850_cmu_probe(struct platform_device *pdev)
> +{
> +       const struct samsung_cmu_info *info;
> +       struct device *dev = &pdev->dev;
> +       struct device_node *np = dev->of_node;
> +
> +       info = of_device_get_match_data(dev);
> +       exynos850_init_clocks(np, info->clk_regs, info->nr_clk_regs);
> +       samsung_cmu_register_one(np, info);
> +
> +       /* Keep bus clock running, so it's possible to access CMU registers */
> +       if (info->clk_name) {
> +               struct clk *bus_clk;
> +
> +               bus_clk = clk_get(dev, info->clk_name);
> +               if (IS_ERR(bus_clk)) {
> +                       pr_err("%s: could not find bus clock %s; err = %ld\n",
> +                              __func__, info->clk_name, PTR_ERR(bus_clk));
> +               } else {
> +                       clk_prepare_enable(bus_clk);
> +               }
> +       }
> +
> +       return 0;
> +}
> +
> +/* CMUs which belong to Power Domains and need runtime PM to be implemented */
> +static const struct of_device_id exynos850_cmu_of_match[] = {
> +       {
> +               .compatible = "samsung,exynos850-cmu-hsi",
> +               .data = &hsi_cmu_info,
> +       }, {
> +               .compatible = "samsung,exynos850-cmu-peri",
> +               .data = &peri_cmu_info,
> +       }, {
> +               .compatible = "samsung,exynos850-cmu-core",
> +               .data = &core_cmu_info,
> +       }, {
> +               .compatible = "samsung,exynos850-cmu-dpu",
> +               .data = &dpu_cmu_info,
> +       }, {
> +       },
> +};
> +
> +static struct platform_driver exynos850_cmu_driver __refdata = {
> +       .driver = {
> +               .name = "exynos850-cmu",
> +               .of_match_table = exynos850_cmu_of_match,
> +               .suppress_bind_attrs = true,
> +       },
> +       .probe = exynos850_cmu_probe,
> +};
> +
> +static int __init exynos850_cmu_init(void)
> +{
> +       return platform_driver_register(&exynos850_cmu_driver);
> +}
> +core_initcall(exynos850_cmu_init);
> --
> 2.30.2
>



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux