[PATCH 07/12] mfd: dt-bindings: samsung,s2mps11: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the MFD part of Samsung S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02
family of PMICs to DT schema format.  Previously the bindings were
mostly in mfd/samsung,sec-core.txt.

The conversion copies parts of description from existing bindings
therefore the license is not changed from GPLv2.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
 .../bindings/mfd/samsung,s2mps11.yaml         | 267 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 268 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml

diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..771b3f16da96
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+  which include voltage and current regulators, RTC, clock outputs and other
+  sub-blocks.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-pmic
+      - samsung,s2mps13-pmic
+      - samsung,s2mps14-pmic
+      - samsung,s2mps15-pmic
+      - samsung,s2mpu02-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulators.
+
+  samsung,s2mps11-acokb-ground:
+    description: |
+      Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+      the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+      power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+      low, the rising ACOKB will trigger power off.
+    type: boolean
+
+  samsung,s2mps11-wrstbi-ground:
+    description: |
+      Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+      suspended it will always go down thus triggerring unwanted buck warm
+      reset (setting buck voltages to default values).
+    type: boolean
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps11-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps11.yaml
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps13-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps13.yaml
+        samsung,s2mps11-acokb-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps14-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps14.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps15-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps15.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpu02-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mpu02.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps11-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s2mps11_irq>;
+            samsung,s2mps11-acokb-ground;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps11-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO4 {
+                    regulator-name = "vdd_adc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ....
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK3 {
+                    regulator-name = "vdd_int";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck2_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps14-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps14-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VLDO1_1.0V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VBUCK1_1.0V";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a7cb990b182..2de215d1274c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16600,6 +16600,7 @@ L:	linux-kernel@xxxxxxxxxxxxxxx
 L:	linux-samsung-soc@xxxxxxxxxxxxxxx
 S:	Supported
 F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+F:	Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
-- 
2.30.2




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux