Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> --- drivers/clk/samsung/Kconfig | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig index 0441c4f73ac9..0e18d6ff2916 100644 --- a/drivers/clk/samsung/Kconfig +++ b/drivers/clk/samsung/Kconfig @@ -67,7 +67,8 @@ config EXYNOS_5420_COMMON_CLK depends on COMMON_CLK_SAMSUNG help Support for the clock controller present on the Samsung - Exynos5420 SoCs. Choose Y here only if you build for this SoC. + Exynos5420/Exynos5422/Exynos5800 SoCs. Choose Y here only if you + build for this SoC. config EXYNOS_ARM64_COMMON_CLK bool "Samsung Exynos ARMv8-family clock controller support" if COMPILE_TEST @@ -79,38 +80,47 @@ config EXYNOS_AUDSS_CLK_CON default y if ARCH_EXYNOS help Support for the Audio Subsystem CLKCON clock controller present - on some Exynos SoC variants. Choose M or Y here if you want to - use audio devices such as I2S, PCM, etc. + on some Samsung Exynos SoC variants. Choose M or Y here if you want + to use audio devices such as I2S, PCM, etc. config EXYNOS_CLKOUT tristate "Samsung Exynos clock output driver" depends on COMMON_CLK_SAMSUNG default y if ARCH_EXYNOS help - Support for the clock output (XCLKOUT) present on some of Exynos SoC - variants. Usually the XCLKOUT is used to monitor the status of the - certains clocks from SoC, but it could also be tied to other devices - as an input clock. + Support for the clock output (XCLKOUT) present on some of Samsung + Exynos SoC variants. Usually the XCLKOUT is used to monitor the + status of the certains clocks from SoC, but it could also be tied to + other devices as an input clock. # For S3C24XX platforms, select following symbols: config S3C2410_COMMON_CLK bool "Samsung S3C2410 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG help - Build the s3c2410 clock driver based on the common clock framework. + Support for the clock controller present on the Samsung + S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for + this SoC. config S3C2410_COMMON_DCLK bool select COMMON_CLK_SAMSUNG select REGMAP_MMIO help - Temporary symbol to build the dclk driver based on the common clock - framework. + Support for the dclk clock controller present on the Samsung + S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build + for this SoC. config S3C2412_COMMON_CLK bool "Samsung S3C2412 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG + help + Support for the clock controller present on the Samsung S3C2412 SoCs. + Choose Y here only if you build for this SoC. config S3C2443_COMMON_CLK bool "Samsung S3C2443 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG + help + Support for the clock controller present on the Samsung + S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC. -- 2.30.2
