On Wed, 26 May 2021 13:20:36 -0400, Krzysztof Kozlowski wrote: > From: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > > Interrupt line can be configured on different hardware in different way, > even inverted. Therefore driver should not enforce specific trigger > type - edge falling - but instead rely on Devicetree to configure it. > > The Maxim 14577/77836 datasheets describe the interrupt line as active > low with a requirement of acknowledge from the CPU therefore the edge > falling is not correct. > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > Acked-by: Iskren Chernev <iskren.chernev@xxxxxxxxx> > > --- > > Changes since v1: > 1. Remove the 'flags' variable. > 2. Added ack. > 3. Rebase - the bindings were converted to dtschema. > --- > .../devicetree/bindings/power/supply/maxim,max17040.yaml | 2 +- > drivers/power/supply/max17040_battery.c | 4 +--- > 2 files changed, 2 insertions(+), 4 deletions(-) > Acked-by: Rob Herring <robh@xxxxxxxxxx>
