On Sat, Mar 13, 2021 at 09:19:51AM +0530, Bhaskar Chowdhury wrote:
>
> Trivial spelling fixes throughout the file.
>
LGTM
Reviewed-by: Tom Saeger <tom.saeger@xxxxxxxxxx>
> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@xxxxxxxxx>
> ---
> Changes from V2:
> Incoporated the findings of Tom Saeger <tom.saeger@xxxxxxxxxx>
>
> drivers/cpufreq/s5pv210-cpufreq.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
> index 69786e5bbf05..73110b005716 100644
> --- a/drivers/cpufreq/s5pv210-cpufreq.c
> +++ b/drivers/cpufreq/s5pv210-cpufreq.c
> @@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock);
> /* Use 800MHz when entering sleep mode */
> #define SLEEP_FREQ (800 * 1000)
>
> -/* Tracks if cpu freqency can be updated anymore */
> +/* Tracks if cpu frequency can be updated anymore */
> static bool no_cpufreq_access;
>
> /*
> @@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = {
>
> /*
> * This function set DRAM refresh counter
> - * accoriding to operating frequency of DRAM
> + * according to operating frequency of DRAM
> * ch: DMC port number 0 or 1
> * freq: Operating frequency of DRAM(KHz)
> */
> @@ -320,7 +320,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>
> /*
> * 3. DMC1 refresh count for 133Mhz if (index == L4) is
> - * true refresh counter is already programed in upper
> + * true refresh counter is already programmed in upper
> * code. 0x287@83Mhz
> */
> if (!bus_speed_changing)
> @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> /*
> * 6. Turn on APLL
> * 6-1. Set PMS values
> - * 6-2. Wait untile the PLL is locked
> + * 6-2. Wait until the PLL is locked
> */
> if (index == L0)
> writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
> @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> } while (!(reg & (0x1 << 29)));
>
> /*
> - * 7. Change souce clock from SCLKMPLL(667Mhz)
> + * 7. Change source clock from SCLKMPLL(667Mhz)
> * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
> * (667/4=166)->(200/4=50)Mhz
> */
> @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> }
>
> /*
> - * L4 level need to change memory bus speed, hence onedram clock divier
> + * L4 level needs to change memory bus speed, hence onedram clock divider
> * and memory refresh parameter should be changed
> */
> if (bus_speed_changing) {
> --
> 2.26.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
