Re: [RFT PATCH v3 16/27] irqchip/apple-aic: Add support for the Apple Interrupt Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 04 Mar 2021 21:38:51 +0000,
Hector Martin <marcan@xxxxxxxxx> wrote:
> 
> This is the root interrupt controller used on Apple ARM SoCs such as the
> M1. This irqchip driver performs multiple functions:
> 
> * Handles both IRQs and FIQs
> 
> * Drives the AIC peripheral itself (which handles IRQs)
> 
> * Dispatches FIQs to downstream hard-wired clients (currently the ARM
>   timer).
> 
> * Implements a virtual IPI multiplexer to funnel multiple Linux IPIs
>   into a single hardware IPI
>

[...]

> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
> +static void __exception_irq_entry aic_handle_irq(struct pt_regs *regs)
> +{
> +	struct aic_irq_chip *ic = aic_irqc;
> +	u32 event, type, irq;
> +
> +	do {
> +		/*
> +		 * We cannot use a relaxed read here, as DMA needs to be
> +		 * ordered with respect to the IRQ firing.
> +		 */
> +		event = readl(ic->base + AIC_EVENT);
> +		type = FIELD_GET(AIC_EVENT_TYPE, event);
> +		irq = FIELD_GET(AIC_EVENT_NUM, event);
> +
> +		if (type == AIC_EVENT_TYPE_HW)
> +			handle_domain_irq(aic_irqc->hw_domain, irq, regs);
> +		else if (type == AIC_EVENT_TYPE_IPI && irq == 1)
> +			aic_handle_ipi(regs);
> +		else if (event != 0)
> +			pr_err("Unknown IRQ event %d, %d\n", type, irq);
> +	} while (event);
> +
> +	/*
> +	 * vGIC maintenance interrupts end up here too, so we need to check
> +	 * for them separately. Just report and disable vGIC for now, until
> +	 * we implement this properly.
> +	 */
> +	if ((read_sysreg_s(SYS_ICH_HCR_EL2) & ICH_HCR_EN) &&
> +		read_sysreg_s(SYS_ICH_MISR_EL2) != 0) {
> +		pr_err("vGIC IRQ fired, disabling.\n");

Please add a _ratelimited here. Whilst debugging KVM on this machine,
I ended up with this firing at such a rate that it was impossible to
do anything useful. Ratelimiting it allowed me to pinpoint the
problem.

[...]

> +/*
> + * FIQ irqchip
> + */
> +
> +static void aic_fiq_mask(struct irq_data *d)
> +{
> +	/* Only the guest timers have real mask bits, unfortunately. */
> +	switch (d->hwirq) {
> +	case AIC_TMR_GUEST_PHYS:
> +		sysreg_clear_set_s(SYS_APL_VM_TMR_FIQ_ENA_EL1, VM_TMR_FIQ_ENABLE_P, 0);
> +		break;
> +	case AIC_TMR_GUEST_VIRT:
> +		sysreg_clear_set_s(SYS_APL_VM_TMR_FIQ_ENA_EL1, VM_TMR_FIQ_ENABLE_V, 0);
> +		break;
> +	}
> +}
> +
> +static void aic_fiq_unmask(struct irq_data *d)
> +{
> +	switch (d->hwirq) {
> +	case AIC_TMR_GUEST_PHYS:
> +		sysreg_clear_set_s(SYS_APL_VM_TMR_FIQ_ENA_EL1, 0, VM_TMR_FIQ_ENABLE_P);
> +		break;
> +	case AIC_TMR_GUEST_VIRT:
> +		sysreg_clear_set_s(SYS_APL_VM_TMR_FIQ_ENA_EL1, 0, VM_TMR_FIQ_ENABLE_V);
> +		break;
> +	}
> +}
> +
> +static void aic_fiq_eoi(struct irq_data *d)
> +{
> +	/* We mask to ack (where we can), so we need to unmask at EOI. */
> +	if (!irqd_irq_disabled(d) && !irqd_irq_masked(d))

Ah, be careful here: irqd_irq_masked() doesn't do what you think it
does for per-CPU interrupts. It's been on my list to fix for the rVIC
implementation, but I never got around to doing it, and all decent ICs
hide this from SW by having a HW-managed mask, similar to what is on
the IRQ side.

I can see two possibilities:

- you can track the masked state directly and use that instead of
  these predicates

- you can just drop the masking altogether as this is only useful to a
  hosted hypervisor (KVM), which will have to do its own masking
  behind the scenes anyway

> +		aic_fiq_unmask(d);
> +}
> +

The rest looks good to me.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux