The reset gpio logic of the atmel driver was changed to be active low at
around the same time this device tree was accepted into the kernel.
Adjust the configuration so that the touchscreen is in a usable state.
Signed-off-by: Martin Jücker <martin.juecker@xxxxxxxxx>
---
arch/arm/boot/dts/exynos4412-p4note.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 0f8d4164a977..b2f9d5448a18 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -307,7 +307,7 @@ touchscreen@4a {
pinctrl-names = "default";
interrupt-parent = <&gpm2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpm0 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
};
};
--
2.25.1
