Hi
On 29.10.2020 18:50, Krzysztof Kozlowski wrote:
> On Wed, Oct 28, 2020 at 10:08:13PM +0100, Paweł Chmiel wrote:
>> In vendor sources for Exynos 7420, psci is not used to reboot or
>> poweroff device. Instead we should use syscon reboot/poweroff.
>> Previously it was not possible to poweroff (no syscon poweroff node) or
>> reboot (because it was handled by psci and this way is not working for
>> Exynos).
>
> Do you want to say that PSCI cannot be used to power off or reboot?
Yes
>
>>
>> Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
>> Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
>> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/exynos/exynos7.dtsi | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> index 959918f4ca45..47d54c369d03 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> @@ -117,8 +117,10 @@ cpu_atlas3: cpu@3 {
>> };
>>
>> psci {
>> - compatible = "arm,psci-0.2";
>> + compatible = "arm,psci";
>
> Please explain how is it related to this issue? You onle mentioned
> a problem of lacking syscon-reboot node.
>
>> method = "smc";
>> + cpu_off = <0x84000002>;
>> + cpu_on = <0xC4000003>;
>
> The same question.
Thanks for feedback. I'll split this patch into two - one for inclusion
of exynos-syscon-restart.dtsi and second one fixing psci compatible (so
syscon-poweroff/restart will be working).
>
>> };
>>
>> soc: soc@0 {
>> @@ -552,6 +554,13 @@ pmu_system_controller: system-controller@105c0000 {
>> compatible = "samsung,exynos7-pmu", "syscon";
>> reg = <0x105c0000 0x5000>;
>>
>> + poweroff: syscon-poweroff {
>> + compatible = "syscon-poweroff";
>> + regmap = <&pmu_system_controller>;
>> + offset = <0x330C>; /* PS_HOLD_CONTROL */
>> + mask = <0x5200>; /* reset value */
>> + };
>> +
>
> Instead, please include arm/exynos-syscon-restart.dtsi.
Will do this.
>
> Best regards,
> Krzysztof
>
