Re: [PATCH] ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03.11.2020 15:02, Marek Szyprowski wrote:
> MicroUSB port on OdroidU3+ boards can operate both as peripheral or as
> host port. Till now it was configured as pheriperal only port, but it
> turned out that the DWC2 driver code already handles everything needed to
> support USB role-switch, so switch it to dual-role (OTG) mode. This has
> no effect on OdroidU3 (with 'plus') and OdroidX2, which doesn't have USB
/s/with/without
> needed ID pin and VBUS wiring. Those will still operate correctly in
> pheriperal mode only.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
>   arch/arm/boot/dts/exynos4412-odroid-common.dtsi |  1 -
>   arch/arm/boot/dts/exynos4412-odroidu3.dts       | 14 ++++++++++++++
>   arch/arm/boot/dts/exynos4412-odroidx.dts        |  4 ++++
>   3 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index 2a6f5b1d7645..2b20d9095d9f 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -255,7 +255,6 @@
>   };
>   
>   &hsotg {
> -	dr_mode = "peripheral";
>   	status = "okay";
>   	vusb_d-supply = <&ldo15_reg>;
>   	vusb_a-supply = <&ldo12_reg>;
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index b8549d846f86..746c2a99a83c 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -21,6 +21,15 @@
>   		reg = <0x40000000 0x7FF00000>;
>   	};
>   
> +	vbus_otg_reg: voltage-regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VBUS_VDD_5.0V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   		led1 {
> @@ -105,6 +114,11 @@
>   	phy-names = "hsic0", "hsic1";
>   };
>   
> +&hsotg {
> +	dr_mode = "otg";
> +	vbus-supply = <&vbus_otg_reg>;
> +};
> +
>   &sound {
>   	model = "Odroid-U3";
>   	samsung,audio-widgets =
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> index 46381e9097f4..d6ee62bf336c 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -76,6 +76,10 @@
>   	};
>   };
>   
> +&hsotg {
> +	dr_mode = "peripheral";
> +};
> +
>   &mshc_0 {
>   	vqmmc-supply = <&buck8_reg>;
>   };

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux