The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab..143f45eaa953 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -94,7 +94,7 @@ i2c_max98504: i2c-gpio-0 {
#size-cells = <0>;
status = "okay";
- max98504: max98504@31 {
+ max98504: codec@31 {
compatible = "maxim,max98504";
reg = <0x31>;
maxim,rx-path = <1>;
@@ -386,7 +386,7 @@ &hsi2c_0 {
status = "okay";
clock-frequency = <2500000>;
- s2mps13-pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps13-pmic";
interrupt-parent = <&gpa0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -817,7 +817,7 @@ &hsi2c_7 {
status = "okay";
clock-frequency = <1000000>;
- sii8620@39 {
+ bridge@39 {
reg = <0x39>;
compatible = "sil,sii8620";
cvcc10-supply = <&ldo36_reg>;
@@ -852,7 +852,7 @@ mhl_to_musb_con: endpoint {
&hsi2c_8 {
status = "okay";
- max77843@66 {
+ pmic@66 {
compatible = "maxim,max77843";
interrupt-parent = <&gpa1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
@@ -1231,7 +1231,7 @@ &spi_1 {
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
status = "okay";
- wm5110: wm5110-codec@0 {
+ wm5110: codec@0 {
compatible = "wlf,wm5110";
reg = <0x0>;
spi-max-frequency = <20000000>;
--
2.25.1
