[PATCH 1/8] dma-mapping: add DMA_ATTR_LOW_ADDRESS attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some devices require to allocate a special buffer (usually for the
firmware) just at the beginning of the address space to ensure that all
further allocations can be expressed as a positive offset from that
special buffer. When IOMMU is used for managing the DMA address space,
such requirement can be easily fulfilled, simply by enforcing the
'first-fit' IOVA allocation algorithm.

This patch adds a DMA attribute for such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
 include/linux/dma-mapping.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index bb138ac6f5e6..c8c568ba375b 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -66,6 +66,12 @@
  * at least read-only at lesser-privileged levels).
  */
 #define DMA_ATTR_PRIVILEGED		(1UL << 9)
+/*
+ * DMA_ATTR_LOW_ADDRESS: used to indicate that the buffer should be allocated
+ * at the lowest possible DMA address, usually just at the beginning of the
+ * DMA/IOVA address space ('first-fit' allocation algorithm).
+ */
+#define DMA_ATTR_LOW_ADDRESS		(1UL << 10)
 
 /*
  * A dma_addr_t can hold any valid DMA or bus address for the platform.
-- 
2.17.1




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux