[PATCH 17/25] ARM: dts: s5pv210: use defines for GPIO flags in Goni

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace hard-coded flags with defines for readability.  No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
 arch/arm/boot/dts/s5pv210-goni.dts | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c8714bf0b6e4..77d1c5144afd 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "s5pv210.dtsi"
 
@@ -51,7 +52,7 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <0>;
-			gpio = <&mp05 4 0>;
+			gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -77,15 +78,15 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <3>;
-			gpio = <&gpj1 3 0>;
+			gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
 
 	i2c_pmic: i2c-pmic {
 		compatible = "i2c-gpio";
-		gpios = <&gpj4 0 0>, /* sda */
-			<&gpj4 3 0>; /* scl */
+		gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>, /* sda */
+			<&gpj4 3 GPIO_ACTIVE_HIGH>; /* scl */
 		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -95,13 +96,13 @@
 			reg = <0x66>;
 
 			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
 			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
 							<1200000>, <1200000>;
 
 			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
 			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
 
 			regulators {
@@ -395,8 +396,8 @@
 		clock-frequency = <16000000>;
 		clocks = <&camera 0>;
 		clock-names = "mclk";
-		nreset-gpios = <&gpb 2 0>;
-		nstby-gpios = <&gpb 0 0>;
+		nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+		nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;
 
 		port {
 			noon010pc30_ep: endpoint {
-- 
2.17.1




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux