dtschema expects DMA channels in specific order (tx, rx and tx-sec). The order actually should not matter because dma-names is used however let's make it aligned with dtschema to suppress warnings like: i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 96e667ba1c3f..72fb9d9f7ba3 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -240,8 +240,8 @@ reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -260,8 +260,8 @@ reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -275,8 +275,8 @@ reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; -- 2.17.1
